Reverse Cycle Air Conditioning Richmond, Warm Winters Without Gas

Reverse cycle air conditioning Richmond homes rely on does two jobs from one system: it heats through winter by drawing warmth from the outdoor air, and it cools in summer. For many households the real reason to install it is to retire an old gas heater. Richmond's housing shapes the job, with 53.0% of occupied dwellings counted as flats or apartments and 30.7% as terraces, row houses and other attached homes in the ABS 2021 Census. Peak Air Conditioning Richmond sizes each unit for winter heat loss, places the indoor and outdoor units so warm air reaches where people sit, and lists the heating kW, the heating star rating and Victorian Energy Upgrades eligibility in a free written quote. Bookings run from 6am to 10pm, seven days. Call 0468 046 042 to book an inspection.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Richmond for Heating and Cooling for Reverse Cycle Air Conditioning

Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.

Peak Air Conditioning Richmond

Reverse Cycle Air Conditioning Richmond: Heat Pump Heating and Cooling

The Australian Government's Energy Rating site sorts air conditioners into three kinds: cooling only, heating only, and heating and cooling, which it calls reverse cycle. That last kind is what most Melbourne buyers mean when they ask for an air conditioner, because one system replaces a heater as well as a fan. The three points below explain how reverse cycle air conditioning heats, how it relates to the term split system, and why a cooling-only unit rarely makes sense in a Melbourne home.

Air-Source Heat Pumps That Draw Heat from Outdoor Air

Energy Rating notes that air conditioners can also be known as heat pumps, and the name describes the job well. A reverse cycle system does not make heat by burning fuel or warming an element. It moves heat that is already there. In heating mode, the refrigerant passing through the outdoor coil is colder than the outside air, so it absorbs warmth even on a cold morning. The compressor then raises the refrigerant's pressure and temperature, and the indoor coil releases that heat into the room. In summer a component called the reversing valve switches the direction of flow, so the indoor coil absorbs heat and the outdoor unit gets rid of it, which is where the name reverse cycle comes from. The same term, heat pump, is also used for heat pump hot water systems, which heat a tank of water rather than a room and are a different product from the wall and ducted units on this page.

Reverse Cycle versus Split System: Function and Format

The two terms answer different questions, which is why they are so often confused. Reverse cycle describes what a system does: it heats and cools. Split system describes how it is built: an indoor unit and an outdoor unit joined by refrigerant pipes. Most systems sold in Melbourne are both at once, and Mitsubishi Electric's own FAQ notes that most split system air conditioners perform both heating and cooling. The overlap is not total. A split can be cooling only, and reverse cycle is not limited to wall splits, because multi-head systems running several rooms from one outdoor unit and ducted systems hidden in the ceiling can also be reverse cycle. The useful order for a buyer is format first, wall split, multi-head or ducted, then confirming that the chosen model heats. Wall, floor console and multi-head formats, the brands and the star and noise ratings that separate them are compared on the split system installation page.

Cooling-Only Models and Why Melbourne Homes Rarely Choose Them

Cooling-only units are still made, but they are aimed at warmer parts of the country. Mitsubishi Electric sells its MSY-GY90 as a cooling-only air conditioner and states that availability of its cooling-only wall-mounted split series is limited to Northern Australia. Daikin also lists an Alira X Cooling Only version of a wall model it otherwise sells as reverse cycle. For a Richmond home the case against cooling only is practical. A reverse cycle unit takes the same wall space, the same outdoor position and the same pipe run, and it also heats the room through winter. A cooling-only unit leaves the house needing a separate heater, with its own running cost and, if it burns gas, its own servicing. It is worth confirming on any quote which of the two types is being fitted.

Clifton Hill Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

Reverse Cycle Installation Sized and Placed for Winter Heating

A reverse cycle unit that will replace a heater has to be planned around the coldest mornings of the year, not the hottest afternoons. That changes how the unit is sized, where the indoor head goes, where the outdoor unit sits and what happens to the old heater. The four steps below follow the order in which those decisions are made at the inspection.

Sizing for Winter Heat Loss, Not Summer Heat Gain

A room's summer heat gain and its winter heat loss are two different numbers. Summer gain is driven by sun on west-facing glass and a hot roof, while winter loss is driven by draughts, uninsulated ceilings and walls, single glazing and the gap between the indoor and outdoor temperature. Mitsubishi Electric's buying guide says sizing is not as simple as reading a room's square metres and calls a professional heat load calculation essential, weighing the local climate, which sides face the sun, insulation, ceiling height and the size, type and orientation of windows and doors. Rinnai's sizing guidance for its Brivis heaters names the same family of factors and calls for a whole-of-home heat load calculation. For a heat pump bought mainly for winter, the heating side of that calculation sets the size. The government Energy Rating label lists heating and cooling capacity as separate kilowatt figures, so the heating figure is the one checked against the room's heat loss. No floor-area table can stand in for that calculation.

Indoor Unit Height and Airflow for Warmth at Floor Level

Warm air rises, so the height of the indoor unit matters more for heating than for cooling. The Australian Government's YourHome guide makes the point for ducted outlets: floor outlets are often better than ceiling outlets for heating, because warm air naturally rises. Wall units follow the same physics. Daikin describes its wall-mounted units as mounted high for better airflow and circulation of conditioned air, and says its floor-standing units, mounted lower, warm the ground more effectively. Most rooms still suit a high wall head. Mitsubishi Electric's installation manual for its MSZ-AP series recommends a mounting height of 1.8 m to 2.3 m, in a position where warm or cool air spreads over the entire room and nothing blocks the airflow. In practice that usually means aiming the head down the length of the room towards where people sit, rather than across a doorway or into a corner, so the warm air reaches the lower part of the room before it collects near the ceiling.

Outdoor Unit Clearance and Defrost Water Drainage

In heating mode the outdoor unit does the hard work, and two details decide how well it copes. The first is clearance. Mitsubishi Electric's MSZ-AP installation manual draws minimum clear distances around the outdoor unit, from 100 mm on its tightest sides to 350 mm on its widest, with open space above, and its mounting plan shows air drawn in through the back and one side and pushed out of the front. As a general rule of how heat pumps work, frost can build on the cold outdoor coil in heating mode and the unit periodically melts it off. The manual asks for a position not exposed to strong wind, because wind during defrosting makes the defrost take longer. The second detail is water. The manual states that the outdoor unit produces condensate during heating operation, and asks for a spot where neither the unit nor the ground is wet by drain water or damaged by frozen drain water. Where that water would land on a path, a doorway or a neighbour's balcony, the manual provides for drain piping: a drain socket and a 15 mm drain hose laid with a downhill grade, although it warns against using the socket in cold regions, where the drain can freeze and stop the fan.

Disconnecting an Old Gas Heater Through a Licensed Gasfitter

When a reverse cycle unit replaces a gas room heater, the old heater has to come off the gas line safely, and that is neither refrigerant nor electrical work. Energy Safe Victoria's advice is to always use a licensed gasfitter for any installation, repair or renovation that involves gas, and it states plainly that gas work is not a DIY project. In Victoria that means a licensed gasfitter registered with the Building and Plumbing Commission. Energy Safe Victoria classes domestic space heaters as Type A appliances, and the Commission requires a compliance certificate for the installation, modification or relocation of consumer gas piping, issued to the customer within five days of the work. Capping the supply where a heater is removed may fall under that rule, which the gasfitter confirms. On a heat pump job, Peak Air Conditioning Richmond has the gas disconnection carried out by a licensed gasfitter as its own line of work, separate from the refrigerant and electrical trades, and the two can be timed so the room is not left without heat.

Peak Air Conditioning Richmond

Why Choose Peak Air Conditioning Richmond for Reverse Cycle Installation

A reverse cycle installation joins two licensed trades, refrigerant and electrical, and a third when a gas heater is retired. The three points below cover the licence behind the refrigerant work, the electrical certificate that should arrive afterwards and what the written quote should show. Inspections and installs can be booked from 6am to 10pm, seven days, with same-day visits where possible. In a suburb where more than half of homes are rented (54.7%, ABS 2021 Census), the person booking is often a property manager working around a tenant's day, and early or evening times make that easier.

ARC Licensed Refrigerant Handling on Every Heat Pump Install

The Australian Refrigeration Council states that any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence. Its definition of handling includes installing, commissioning, servicing and maintaining that equipment whether or not refrigerant is present, which takes in the whole heat pump job from fixing the bracket to the first start-up. The council also offers a licence named for this equipment, the Restricted Heat Pump (Split System) installation and decommissioning licence, which covers taking an old unit out as well as putting a new one in. Mitsubishi Electric's buying guide repeats the rule: any person installing or servicing air conditioning equipment must hold a refrigerant handling licence. On the install itself, the council's Cool Change bulletin requires a pressure test and inspection before evacuation on all refrigeration piping, using oxygen-free nitrogen. A buyer can ask for the technician's licence number and keep it with the paperwork, and the manufacturer warranty applies when the unit is installed to the manufacturer's requirements.

A Certificate of Electrical Safety Issued Within 30 Days

Swapping a gas heater for a heat pump moves the room's heating onto the electrical supply, so the electrical side deserves the same care as the refrigerant side. Mitsubishi Electric's MSZ-AP manual states that, to comply with AS/NZS 3000, the wiring between the indoor and outdoor units must be installed by a licensed electrical contractor. Where new electrical installation work is done, such as a dedicated circuit from the switchboard, Energy Safe Victoria says a Certificate of Electrical Safety is required by the Electricity Safety Act 1998. The registered electrical contractor or licensed electrical worker must give the customer a copy: within 30 days for non-prescribed work, and within 4 days of completing the certificate for prescribed work, which must also be inspected by a licensed electrical inspector. Energy Safe Victoria defines non-prescribed work as all other electrical installation work, and the electrician states which category applies. The certificate belongs with the unit's papers, because Victorian rental providers must have electrical installations checked by a licensed or registered electrician every 2 years.

A Written Quote Showing Heating kW, Star Ratings and VEU Eligibility

A heat pump quote should let a buyer check the heating side, not just the price, so it follows an inspection of the room and the outdoor position. The written quote names the model and its heating capacity in kilowatts, taken from the capacity panel on the government Energy Rating label, which lists heating separately from cooling. It gives the heating star rating for the home's climate zone: the Zoned Energy Rating Label rates heating and cooling separately for hot, average and cold zones on a scale of 1 to 10 stars, and the Energy Rating Calculator finds a home's zone by postcode. It then states whether the job looks eligible for a Victorian Energy Upgrades discount. The program's conditions are that the product is approved under the program, comes with a minimum 5-year warranty if it is for a home and is a high-efficiency reverse cycle air conditioner, and that a replaced system is in a property more than 2 years old. A gas disconnection, where one is needed, appears as its own line, so nothing about the heating swap is left off the page.

Abbotsford Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

What Reverse Cycle Air Conditioning Costs in Richmond

The ranges below come from independent Melbourne cost guides, one Melbourne installer and one national guide, all dated 2026, plus the Victorian Government's own discount table. They are indicative, not the business's own prices, and the real figure is set in a written quote after an inspection. Reverse cycle is priced by format and capacity, so a single room, several rooms and a whole home sit in different bands.

Reverse Cycle Air Conditioning Installation Cost for One Room

Hipages' reverse cycle cost guide, a national source last updated in January 2026, puts the unit alone at $600 to $2,600 or more and a simple split supplied and installed at $1,400 to $3,000. The Melbourne guides break the price down by capacity. The whatsthedamage Melbourne table, updated November 2026, lists supply and installation at $1,250 to $2,625 for a 2.5 kW unit, $1,475 to $2,950 for 3.5 kW, $1,900 to $3,675 for 5 kW and $2,300 to $4,725 for 7 kW. Climate Control Solutions, a Melbourne installer whose figures were last reviewed in July 2026, gives indicative installed prices of $2,700 to $3,500 for 5.0 kW and $3,300 to $4,300 for 7.1 kW. Those prices assume a straightforward job. The same installer suggests allowing roughly $450 extra for licensed electrical work when a new circuit is needed, and about $250 per unit to remove an old air conditioner.

Multi-Room and Ducted Reverse Cycle Price Ranges

Heating more than one room changes the format, and the price with it. For a multi-head system, where several indoor heads share one outdoor unit, the whatsthedamage Melbourne table lists 2 heads at $4,200 to $7,900 and 4 heads at $7,350 to $12,600, supplied and installed. For whole-home heating through ducts, the same table puts standard ducted reverse cycle for a 3-bedroom home, or a single-storey 4-bedroom with good roof access, at $8,400 to $14,700, and premium or zoned systems at $12,600 to $23,100. Hipages' national reverse cycle guide gives $8,000 to $15,000 for ducted. QuickAir's 2026 Melbourne guide puts ducted for a small 1 to 2-bedroom home at $5,000 to $8,000, a band that matters in a suburb where two-thirds of homes have one or two bedrooms. Roof space, zoning and duct condition decide where a home falls, and those are set out on the ducted air conditioning page.

VEU Discounts When a Gas Space Heater Is Replaced

The Victorian Energy Upgrades program lists a discount of $630 to $1,610 when a non-ducted gas space heater, such as a single room heater, is replaced with an efficient reverse cycle air conditioner of 3 kW to 9 kW. The program's page gives a range rather than one figure across that span of system sizes, so the amount is confirmed against the specific model being installed rather than assumed from the top of the range. The cost guide figures above do not include any discount. Larger whole-of-home swaps sit on a separate scale: the program lists up to $5,530 off when a ducted gas heater is removed or replaced with an efficient reverse cycle system. Only a product approved under the program qualifies, and the warranty, efficiency and property-age conditions listed in the written quote section above apply to every claim.

Peak Air Conditioning Richmond

Reverse Cycle versus Gas Heating for a Richmond Home

For a Richmond home with an old gas room heater, the decision is usually whether to keep gas or go electric for that room. The three points below compare what each costs to run, what each needs to stay safe and what reverse cycle adds in summer. Gas ducted and hydronic systems are larger whole-home systems with their own trade-offs, so this comparison stays with the room heater swap.

Hourly and Yearly Heating Running Costs Compared

The strongest figure is the Victorian Government's. Its Victorian Energy Upgrades page says households can save up to $460 on energy bills each year when they replace a non-ducted gas space heater with an efficient reverse cycle air conditioner. A weaker but more detailed source, homeupkeep's Melbourne running-cost guide, updated June 2026, puts a 7-star reverse cycle split at about $0.11 to $0.22 an hour against $0.22 to $0.38 an hour for a 5-star ducted gas heater, at its own assumed tariffs of $0.32 per kWh for electricity and $0.045 per MJ for gas. That pairing sets a room unit against a whole-home heater, so it is not like for like, and its figures move whenever tariffs change. Both sources still point the same way, towards lower running costs for an efficient reverse cycle system. Actual savings depend on the household's tariff, how many hours the heater runs and how well the room holds its warmth.

Carbon Monoxide Risk and Two-Yearly Gas Heater Servicing

Energy Safe Victoria states that any gas heater can spill carbon monoxide, including old and new heaters, central heating units, space heaters, wall furnaces and decorative log fires. It describes carbon monoxide as a poisonous, colourless and odourless gas, and names the usual causes of high levels: an appliance that is faulty or not maintained, a partly or fully blocked flue, or an installation without enough ventilation. Its recommendation is that all gas heaters are serviced at least every two years by a qualified gasfitter, who inspects the heater and tests for carbon monoxide leakage, and it suggests considering replacement for a heater that is old or has not been serviced for several years. A reverse cycle system burns no fuel, so it has no flame, no flue and no combustion gases to spill. For a gas heater that stays, the two-yearly service remains the safeguard, covered on the ducted heating service and repairs page, and rental homes must also have a gas safety check every 2 years.

Summer Cooling That a Gas Heater Cannot Provide

A gas heater has one job. A reverse cycle unit does a second job from the same wall: the reversing valve flips the flow, and the system that heated the room in July cools it in January. The Energy Rating capacity panel reflects this, showing cooling capacity at one outdoor temperature alongside the two heating figures, and the Zoned Energy Rating Label gives cooling its own star rating, separate from heating. Replacing a gas heater with reverse cycle therefore removes the need for a separate cooling appliance in that room. The trade-off is use. QuickAir, a Melbourne installer, recommends servicing once a year for most Melbourne homes because a reverse cycle system carries the house through winter as well as summer, compared with the two-yearly gas heater service Energy Safe Victoria recommends. One appliance working all year needs a yearly check, and the outdoor unit's position is worth planning with summer evenings in mind as well as winter mornings.

Abbotsford Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

Choosing the Best Reverse Cycle Air Conditioner for Melbourne Winters

For a Melbourne home that leans on its air conditioner for heat, the best reverse cycle air conditioner is the one that keeps delivering heat on the coldest mornings at a sensible running cost. No single brand wins on every count, so the three points below cover what to compare: cold-weather output, the compressor and refrigerant inside the unit, and the published figures for two widely sold ranges.

Low-Temperature Heating Output and Outdoor Operating Range

Two published figures show how a heat pump copes when it is cold outside. The first is the capacity panel on the government Energy Rating label, which displays heating at two outdoor temperatures and cooling at one, each in kilowatts, declared by the manufacturer under the test conditions in the Australian and New Zealand Standard. Energy Rating explains that the higher the kW value, the more heating or cooling the system provides at that outdoor temperature. Output changes as the air outside gets colder, which is why heating is shown twice, and comparing a model's two heating figures shows how much it keeps at the colder test point. The second figure is the manufacturer's operating range. Mitsubishi Electric guarantees its MSZ-AP series to heat at outdoor temperatures from minus 15 to 24°C. For a winter-first buyer, the lower of the two heating figures is the number to compare between models of a similar size, and the cold-zone heating stars are the efficiency figure to read beside it.

Inverter Compressors and R32 Refrigerant

Two pieces of technology come up on the specification sheets of current models. The first is the inverter compressor. Daikin lists variable-speed inverter compressors for precise temperature control among the features of its ducted range, and credits inverter technology with reduced energy consumption. Rather than switching fully on and off, an inverter compressor speeds up and slows down to hold the set temperature, which suits long winter heating sessions. Neither Daikin nor Mitsubishi Electric quotes an efficiency percentage on those pages, so none is quoted here. The second is the refrigerant. Mitsubishi Electric's MSZ-AP series uses R32, and Daikin states that most of its ducted systems use R-32. That matters at install time: Mitsubishi Electric's manual specifies a flare tool, gauge manifold and vacuum pump rated for R32, and asks for the flares on any reused pipe to be remade to the dimension for the new refrigerant. Older systems may still run on R22, which the Australian Refrigeration Council notes Australia largely phased out of import in 2016.

Mitsubishi Electric and Daikin Reverse Cycle Models

Mitsubishi Electric and Daikin both publish the heating figures a buyer needs to compare. Mitsubishi Electric's MSZ-AP wall series spans 2.5 kW to 7.8 kW, lists reverse cycle heating as a feature, runs as quietly as 18 dB(A) in heating mode and carries the minus 15 to 24°C heating range. Its MSZ-AP25 is rated 3.5, 3 and 3 heating stars for the hot, average and cold zones. Daikin's wall range includes the Alira X, Zena and Cora, plus the XL Series of large capacity models designed for large open-plan living, and Daikin recommends its floor-standing models for colder climates where heating is a priority. Daikin states that a Daikin split system can last 10 to 15 years or more with regular maintenance. Fujitsu and Panasonic are other well-known names, and any of these brands can be compared on the same three numbers: heating kW at the colder test point, heating stars for the home's zone and indoor noise in dB(A).

Peak Air Conditioning Richmond

Reverse Cycle Heating for Richmond Terraces and Apartments

Richmond's homes are small by Victorian standards. The ABS 2021 Census counted an average of 2.2 bedrooms per dwelling, against 3.1 across the state, and only 15.6% of homes as separate houses. Wikipedia describes the suburb's housing as a mix of converted warehouse residences, public housing high-rise flats and Victorian-era terraces. The two layouts below are the most common: 30.7% of homes are semi-detached, row or terrace houses and townhouses, and 53.0% are flats or apartments.

Single-Fronted Terraces: Heating Front Bedrooms and Rear Living Areas

Wikipedia notes that most Richmond houses are single-fronted Victorian homes built from the 1850s to the 1930s, typically on long, thin blocks with two bedrooms at the front and the family room and kitchen at the back. On that typical layout the heating need tends to split in two, although each house is checked rather than assumed. The rear living area is usually the larger room and the one likely to be used on winter evenings, so it is the natural spot for the main heat pump, sized from its own heat load. The front bedrooms are smaller and may need heat mainly at night. One option is a separate small split for each bedroom; another is a multi-head system with one outdoor unit at the rear feeding each room. Mitsubishi Electric's buying guide notes that every head on a multi-head must run in the same mode, either heating or cooling, a limit that matters little on a winter night when every room wants heat. The long block also means a long pipe run to the front rooms, which the quote prices as its own item.

Apartments: Heating the Main Living Area with One Wall Unit

Flats and apartments make up 53.0% of Richmond's occupied dwellings, and 66.2% of all homes in the suburb have one or two bedrooms (ABS 2021 Census). In a home that size, one wall unit in the main living area is often the starting point for heating. That is a guide rather than a promise: whether its warmth reaches the bedrooms depends on the floor plan, how open the doorways are and how well the apartment holds heat, and the heat load check at the inspection decides whether a second head is needed. The main living area is also where Victorian rules focus, including the requirement that a broken rental space heater that cannot be repaired after 1 March 2027 be replaced with an efficient reverse cycle air conditioner, set out with owners corporation approval on the air conditioning installation page. On a balcony, the heating-mode drain water from the outdoor unit needs a planned route too, so it does not drip onto the balcony or common property below.

Abbotsford Emergency Air Conditioning Repair

TESTIMONIALS

What Our Reverse Cycle Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Reverse Cycle Air Conditioning Needs

Call or Book Between 6am and 10pm

Call the one number any day between 6am and 10pm. The booking notes the system type, the fault or the job, the address, who needs to be present (owner, tenant, agent or building manager) and any building access rules. Same-day visits are arranged where possible.

Inspection and Written Quote

A technician inspects the site and the existing system or the planned unit positions, then gives a written quote listing equipment, labour, extras and old unit removal. For repairs, the diagnosis comes first and any part is quoted before it is ordered. Work starts once the quote is accepted.

Installation or Repair, Testing and Handover

Each trade works under the licence it needs: ARC for refrigerant, a BPC-registered gasfitter for gas and a licensed electrician for wiring. The system is then tested, the controls are explained, and paperwork such as a Certificate of Electrical Safety or a gas compliance certificate is handed over where the job requires one.

FREQUENTLY ASKED QUESTIONS

Reverse Cycle Air Conditioning In

Everything you need to know about our Reverse Cycle Air Conditioning In

How much does it cost to install reverse cycle air conditioning?

Melbourne cost guides put a supplied and installed 3.5 kW reverse cycle split at around $1,475 to $2,950 and a 7 kW unit at $2,300 to $4,725 (whatsthedamage, November 2026), while hipages' national reverse cycle guide gives $1,400 to $3,000 for a simple split. A 2-head multi-head system is listed at $4,200 to $7,900, and ducted reverse cycle for a 3-bedroom home at around $8,400 to $14,700. Replacing a non-ducted gas space heater can attract a Victorian Energy Upgrades discount of $630 to $1,610. These are indicative ranges, and a free written quote follows an inspection.

What is the difference between reverse cycle and a split system?

Reverse cycle describes what a system does: it heats and cools. Split system describes how it is built: an indoor unit and an outdoor unit joined by refrigerant pipes. Most split systems sold in Melbourne are reverse cycle, but cooling-only splits still exist, and reverse cycle also comes in multi-head and ducted formats. The format is chosen first, then the model is checked to confirm that it heats.

Is reverse cycle air conditioning the same as a heat pump?

Yes. The Australian Government's Energy Rating site says air conditioners can also be known as heat pumps, and it calls the heating and cooling type reverse cycle. A reverse cycle unit moves heat rather than making it: in winter it draws warmth from the outdoor air and releases it indoors, and in summer it reverses the flow. The term heat pump is also used for heat pump hot water systems, which are a separate product that heats water rather than rooms.

Is reverse cycle heating cheaper to run than a gas heater?

The Victorian Energy Upgrades program says replacing a non-ducted gas space heater with an efficient reverse cycle air conditioner can save up to $460 on energy bills each year. Homeupkeep's Melbourne guide puts a 7-star reverse cycle split at about $0.11 to $0.22 an hour, against $0.22 to $0.38 for a 5-star ducted gas heater, at its own assumed tariffs. Actual savings depend on the tariff, the hours of use and the insulation. If the swap lets a home go all-electric, energy.vic.gov.au notes that it pays one service charge instead of two.

Can I get a VEU discount for replacing a gas heater with reverse cycle?

Yes, if the job meets the program's conditions. The Victorian Energy Upgrades program lists a discount of $630 to $1,610 for replacing a non-ducted gas space heater with an efficient 3 kW to 9 kW reverse cycle air conditioner. The product must be approved under the Victorian Energy Upgrades program, come with a minimum 5-year warranty if it is for a home, and be a high-efficiency reverse cycle air conditioner. If an existing heating or cooling system is being replaced, it must be in a property that is more than 2 years old. Peak Air Conditioning Richmond notes whether a job looks eligible on the written quote.

Does reverse cycle heating work when it is cold outside?

Yes, within the model's rated range. Mitsubishi Electric guarantees its MSZ-AP series to heat at outdoor temperatures from minus 15 to 24°C. Output does change with the weather, which is why the government Energy Rating label shows heating capacity at two outdoor temperatures. Comparing the colder of those two figures between models shows which one holds its output better. The outdoor unit should also sit out of strong wind, which Mitsubishi Electric notes makes defrosting take longer.

Request A Free Reverse Cycle Air Conditioning Quote

GET A FREE QUOTE