Air Conditioning Fitzroy, Made to Fit Melbourne's First Suburb

Air conditioning Fitzroy work on this page covers split systems, multi-head systems, ducted reverse cycle, gas ducted heating, servicing, cleaning, repairs and regas in Fitzroy 3065, in the City of Yarra. Wikipedia describes Fitzroy as Melbourne's first suburb, planned in 1839, and as its smallest and most densely populated area outside the CBD, at just 100 ha. The ABS 2021 Census counts 59.4% of occupied dwellings as flats or apartments and 36.5% as semi-detached, row or terrace houses or townhouses, against 12.1% and 13.9% across Victoria, and it counts 58.8% of homes as rented. Much of the suburb is covered by Heritage Overlays, so where an outdoor unit can go is worked out at the quote visit. Jobs are quoted in writing after an inspection, and the phone line is open 6am to 10pm, seven days.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Richmond for Heating and Cooling in Fitzroy

Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.

Air Conditioning Installation in Fitzroy

Air Conditioning Fitzroy for Terrace Rows, Flats and Converted Buildings

Wikipedia describes Fitzroy's housing as one of Melbourne's most extensive stands of terraced housing, along with a mix of converted industrial and commercial buildings, walk-up flats, modern apartments and public housing. What a building was first built as shapes the air conditioning that suits it, so the three H3s below split that way: terrace houses, flats, and former factories, warehouses and shops that are now homes. Heating capacity is covered in the next section, and where an outdoor unit may sit under the heritage rules is covered in the heritage overlay section further down.

Built as Terrace Houses: A Split per Room or Slimline Ducted in the Roof Space

Semi-detached, row and terrace houses and townhouses make up 36.5% of occupied Fitzroy dwellings in the ABS 2021 Census, more than two and a half times the 13.9% share across Victoria. For cooling a terrace there are two layouts. The first is a wall split in each room that needs one. Mitsubishi Electric's MSZ-AP installation manual sets the rules for each indoor unit: a rigid wall without vibration, a height of 1.8 m to 2.3 m above the floor, a spot where the cooled air spreads over the whole room, and space to slide the filter out. In a narrow front room those rules can leave only one or two usable walls, which is why the wall is chosen on site. The second layout is ducted, with one indoor unit in the roof space and a grille in each room. Daikin sells a Slimline ducted range designed for installations where ceiling space is at a premium, and says that with ducted only the controller, the return air and the discharge grilles are visible inside the home, which keeps the walls of a period room clear. Mitsubishi Electric's PEA-M-HAA ducted units have a two-piece construction that the maker calls ideal for existing homes: its installation manual has the fan and coil sections separated, then rejoined before the unit is hung on M10 bolts, and it asks for service access doors of 450 x 450 mm and 600 x 600 mm. Daikin's own FAQ adds that retrofitting ducted into an existing home can be more complex. Whether a particular terrace's roof space can take either unit is not something a census or a map can show, so it is checked through the ceiling access, and ducted is only an option where the roof space allows.

Built as Flats: Wall Splits for Walk-Up Blocks and Newer Apartments

Flats and apartments are the largest dwelling type in Fitzroy, at 59.4% of occupied dwellings in the ABS 2021 Census against 12.1% for Victoria, and 66.3% of homes have two bedrooms or fewer (2.1% studios, 18.4% one bedroom and 45.8% two). They range from the Atherton Gardens high-rise public housing estate on the corner of Brunswick and Gertrude streets, which Wikipedia calls one of Melbourne's largest, to older walk-up blocks and modern apartments. Yarra's heritage database lists Housing Commission walk-up flats on Condell Street dated 1960 to 1970 and Housing Commission flats on Fitzroy Street dated 1950 to 1960. With one or two rooms to cool, a wall split per room is the plain choice, and the outdoor unit is the harder part. In a walk-up block, where there is no lift the outdoor unit and the tools go up the stairs, and where there is no balcony the condenser needs a wall bracket, a roof position or a spot at ground level. The MSZ-AP manual's limits of 20 m of pipe and 12 m of height difference between the two units decide which of those is in reach. For a newer apartment, the balcony or any plant area the building provides is the first place to look. Where the balcony is small, the same manual asks for clearance from 100 mm on the unit's tightest sides to 350 mm on its widest, with open space above, and it notes that the outdoor unit produces condensate in heating mode, so the drain water needs a path that does not wet the unit or the surface below. In either kind of block, the CAV model rules require an owners corporation's written approval before an owner or occupier alters common property or changes the outside appearance of a lot.

Built as Factories, Warehouses or Shops: Multi-Head Systems for Converted Homes

Wikipedia records that from the 1980s Fitzroy's manufacturing and warehouse sites were converted into apartments, and that Macpherson Robertson's confectionery factories, which covered 30 hectares, stand as heritage landmarks today. Yarra's heritage database shows the conversions street by street: parts of the former MacRobertsons factory complex on Kerr Street are listed as now apartments and graded Individually Significant, and the H Ackman & Company factory and warehouse on St David Street, dated 1918, is listed as now apartments with the same grading. The database also types 179 Brunswick Street rows as a shop and residence, a shopfront with living space attached. Where a converted home has several rooms to cool and little outside space for condensers, a multi-head system is built for that case. Mitsubishi Electric describes multi-head splits as several indoor units connected to one outdoor unit, taking up less space outside and minimising the impact that outdoor units have on the exterior of a house, which counts on a heritage-graded wall. Its MXZ range runs from 2 ports to 6 ports on a single outdoor unit. The same maker sets out the trade-offs: every indoor unit on that outdoor unit runs in the same mode, heating or cooling, and the outdoor unit's capacity is shared among the heads running at once, though heads not in use can be switched off. In a tall former warehouse room, Mitsubishi Electric's buying guide notes that taller ceilings mean more air volume to cool or heat. Ceiling heights in Fitzroy conversions are not recorded in any source used here, so they are measured at the quote, and the next section explains how room volume feeds into heating capacity.

Air Conditioning Under Fitzroy Heritage Overlays: Rear Walls, Back Lanes and Corner Blocks

Wikipedia notes that much of Fitzroy is a historic preservation precinct, with many individual buildings and streetscapes covered by Heritage Overlays. Yarra's Database of Heritage Significant Areas (March 2024), read on 19 November 2026, shows the scale: 3,203 rows addressed in Fitzroy, some of them second listings for Victorian Heritage Register places, and 2,559 of them in a single area overlay, HO334. Yarra City Council's own guidance says even minor works, such as installing services, can require a permit in a Heritage Overlay. The conditions below come from Yarra's heritage permit-exemption plan, dated July 2014. A later version may apply, so each condition is one to confirm with Yarra City Council (03 9205 5555) before an outdoor unit goes on.

Outdoor Units on the Rear Wall or Facing a Back Lane: Yarra Heritage Exemption Conditions

Section 2.8 of the 2014 plan deals with domestic services, and air conditioners are on its list. For a residential building in a Heritage Overlay, it makes the installation of an air conditioner that is visible from a street (other than a lane) or public park permit exempt where the unit is attached to the rear wall of the building or sits within the rear setback. The rear-wall wording is the same for every grading in the plan: Individually Significant, Contributory and Not contributory. Two parts of that wording matter in Fitzroy. The first is the lane. Wikipedia describes a tight grid with many narrow streets and back lanes carrying only one-way traffic, and the plan's trigger is written for a street other than a lane, so how a unit seen only from a back lane is treated is a question to put to the council with the address, not something to assume either way. The second is the park: a rear wall that faces one of the small reserves on the grid is in view of a public park, and the plan treats that the same as a street. The plan also makes the demolition of domestic services, air conditioners included, permit exempt for all gradings, so taking out an old unit is covered separately from fitting a new one. It notes that a building permit may also be required, and it does not apply to places on the Victorian Heritage Register, where the council's heritage overlay page says Heritage Victoria decides applications. On a rear wall in a terrace row, the neighbours are close. Energy Rating says a split system's outdoor noise level is important to consider if the unit will be near a window, a bedroom or a neighbour's house, and EPA Victoria's residential noise rules treat a unit heard in another home's habitable room as unreasonable on weekdays before 7am, and after 10pm when heating or 11pm when cooling.

Side Walls and Corner Blocks: Facade Setbacks by Heritage Grading, Checked With the Council

A side wall is where the plan's conditions start to depend on the heritage grading. For a place graded Individually Significant or Contributory, a unit attached to a side wall, or within a side setback, must be set back not less than 4 metres from the front facade for the exemption to apply. For a place graded Not contributory, the figure is not less than 2 metres. On a corner block the plan is blunt: the exemption does not apply to corner located properties, so a corner terrace starts with the council, not the plan. The grading is set address by address, and Fitzroy streets are mixed. In the March 2024 database, Gore Street has 266 Fitzroy rows, of which 131 are Contributory, 78 Individually Significant and 36 Not contributory, while Argyle Street has 68, with 34 Contributory, 12 Individually Significant and 20 Not contributory. Of the 129 Fitzroy rows whose entry names flats or apartments, 112 are graded Not contributory, so for blocks of flats the 2 metre figure is the common one in the database, though the owners corporation's written approval is still needed. The steps for any address are the same: check whether the property is in a Heritage Overlay on VicPlan or with a free property report from land.vic.gov.au, look up its grading in the database, and confirm with Yarra City Council on 03 9205 5555, or its planning team on 9205 5373, before the outdoor unit goes on. The plan itself asks users to contact the council to confirm that no permit is triggered under other parts of the planning scheme. None of this settles whether a particular install needs a permit; it tells the owner what to ask, and what the answer will turn on.

Split System Installation in Fitzroy
Ducted Air Conditioning in Fitzroy

Why Fitzroy Tenants, Agents and Terrace Owners Choose Air Conditioning Professionals Near You

Peak Air Conditioning Richmond takes on Fitzroy jobs for the three groups the census points to. The ABS 2021 Census counts 58.8% of Fitzroy homes as rented, so in most homes the person living there is a tenant, with a landlord and sometimes an agent behind them, while 20.1% are owned with a mortgage, 18.0% outright, and 36.5% of dwellings are terrace-type homes. The three H3s cover what each of them gets: a written quote, the licence behind each trade, and booking hours that fit around a tenancy.

Written Quotes Listing the Unit, Removal of Any Old Heater and the Making Good

A written quote follows an inspection, because the details that set the price in Fitzroy can only be seen on site: the wall or roof space the indoor unit can use, the outdoor position the heritage conditions and any owners corporation allow, and the route for pipes, drain and cable between them. The quote names the unit by brand and model with its kW rating, the indoor and outdoor positions, the pipe and drain route, the electrical work, any approval still needed, and the timing. Where an old heater or air conditioner is coming out, that is listed as its own line. A gas heater is disconnected by a licensed gasfitter before it is removed. An old air conditioner's refrigerant is recovered first: the ARC and AIRAH code says all scheduled refrigerant must be recovered from every part of a system when it is decommissioned, and the unit labelled, dated and signed as emptied. The quote also says what making good covers, such as filling and sealing the old wall penetration, which the MSZ-AP manual has sealed with putty on a new install, and closing off old floor or ceiling outlets when a ducted heater goes. A tenant can pass the quote straight to the landlord or agent, since it shows the unit, the work and the price in one document, and a terrace owner can see how the old heater's removal is handled before agreeing to it.

ARC Licensed Refrigerant Work and Registered Gasfitters for Ducted Heaters

Each trade on an air conditioning or heating job works under the licence that trade requires. Refrigerant work is done under an Australian Refrigeration Council licence: ARC says any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and that covers installing, commissioning, servicing and maintaining it whether or not refrigerant is present. Gas ducted heater work is done by a licensed gasfitter registered with the Building and Plumbing Commission, and servicing needs the specialised Type A appliance servicing class. Energy Safe Victoria suggests asking to see the licence card and checking the registered classes on its back. The electrical side, including the wiring between indoor and outdoor units that the MSZ-AP manual reserves for a licensed electrical contractor under AS/NZS 3000, is done by a licensed electrician, and Energy Safe Victoria says a Certificate of Electrical Safety is required by the Electricity Safety Act 1998, with a copy given to the customer. For a landlord or agent, the electrical certificate and the gas servicing record together are the paperwork that shows each part of the job was done by the right trade.

Lines Open 6am to 10pm Daily, With Visits Timed Around Tenants and Agents

The phone line is open 6am to 10pm, seven days, and calls outside those hours wait until 6am. Those are booking hours; the visit time depends on who needs to be there. Consumer Affairs Victoria says the rental provider must organise and pay for repairs that are not the renter's fault, and that a renter reports a repair in writing to the rental provider or property manager. It lists a cooling appliance or service provided by the rental provider that is not working, and heating that is not working, among urgent repairs, and gives 14 days from a written request for non-urgent ones. For a non-urgent repair, entry needs at least a full day's notice and falls between 8am and 6pm on any day other than a public holiday, though for an urgent repair a renter may agree to other times or less notice. So the visit is set to a window the tenant, the agent and the landlord agree on, and the early and late phone hours let a tenant call before or after work. A terrace owner booking a quote can pick a time when both the ceiling access and the rear yard or lane can be reached.

Fitzroy Streets Covered, From Gertrude Street Up to the Fitzroy Pool

Fitzroy covers just 100 ha, and Wikipedia describes a tightly spaced rectangular grid with many narrow streets and back lanes carrying only one-way traffic, and parking congestion as a problem. The Quote Yard notes that inner city attendance involves parking difficulty and slow travel between jobs, which businesses build into their fees. The H3s below run from the commercial strips of Brunswick and Gertrude Streets to the streets around the town hall in the south and the back streets near the pool in the north, with the heritage database's row counts for each.

Brunswick Street and Gertrude Street Cafes, Galleries and Music Venues: Commercial Air Conditioning

Wikipedia calls Brunswick Street Fitzroy's commercial heart and one of Melbourne's major retail and culinary strips, notes cafes up and down it, and records that it is designated an activity centre under the Melbourne 2030 strategy. Gertrude Street was transformed in the 2000s into a string of fine dining restaurants, art galleries, bookshops and fashion stores, and the suburb as a whole is a hub for live music in Melbourne. The heritage database shows how much of that trade sits in heritage buildings: 325 Brunswick Street rows, 179 of them typed as a shop and residence, most in overlay HO311, and 143 Gertrude Street rows, 72 typed as a shop and residence, across HO334 and HO361. Yarra's permit-exemption plan for air conditioners is written for residential buildings and uses only, so plant for a shop, cafe, gallery or venue, including on a heritage-listed shopfront, is a question for Yarra City Council before it goes on. For small tenancies, Mitsubishi Electric describes its PKA-M wall-mounted unit as suited to offices, meeting rooms and retail spaces, its SUZ-M outdoor units as particularly suited to shop front installations, and its ceiling-suspended units as an option for restaurants, shops and premises with exposed ceilings or heritage features where traditional ducted systems are not viable. EPA Victoria says noise from commercial premises must not be unreasonable or exceed noise limits, and that those limits depend on zoning, nearby noise-sensitive areas and the time of day, which matters for plant on a venue with homes behind it. Commercial air conditioning covers shops, offices and hospitality in more depth.

Southern Fitzroy Around the Town Hall: Napier Street, Moor Street and King William Street

Fitzroy Town Hall stands at 201 Napier Street. Wikipedia records that it was built in stages in 1863, 1887 and 1890, is on the Victorian Heritage Register, and now serves as secondary offices for the City of Yarra, with the Fitzroy Legal Service at the Moor Street entrance. Around it the heritage database is dense. Napier Street, which runs the length of the suburb, has 235 Fitzroy rows: in HO334, 120 Contributory, 50 Individually Significant and 47 Not contributory, plus nine single-place overlays, HO172 to HO180, on the Victorian Heritage Register. Its entries include 16 rows of Falconer Terrace dated 1866 to 1884, and two Housing Commission flat towers graded Not contributory. Moor Street has 114 rows, with Individually Significant the largest group (50 in HO334 and 6 more in HO361), and named terraces such as Myrtle Terrace and Frances Terrace. King William Street has 48 rows: 22 Contributory, 14 Individually Significant, 11 Not contributory and one Victorian Heritage Register place. For a job in these streets, the database grading decides whether the 4 metre or the 2 metre side-wall setback in the exemption plan is the one to check, a Victorian Heritage Register place goes to Heritage Victoria instead, and the small reserves here, Atherton Reserve, Condell Reserve and King William Reserve, put the walls facing them in view of a public park under the plan's wording.

Northern Back Streets: Rose Street, Westgarth Street and Leicester Street Near the Fitzroy Pool

The northern back streets are where Fitzroy's factory past and its newer housing meet. Rose Street has 62 Fitzroy rows in the database, 40 of them Not contributory and 19 Contributory in HO334, with factory and warehouse entries (13 rows), apartments (10) and townhouses, and 16 rows dated 1990 to 2000; several former factories along it are listed as now apartments. It is also home to the Rose Street Artists' Market. Westgarth Street runs the other way on grading: 83 of its 111 rows are Contributory, with 9 Individually Significant and 19 Not contributory. Leicester Street has 80 rows, 46 Not contributory, 27 Contributory and 6 Individually Significant, and its entries include Garryowen Park. Up at the suburb's northern edge is the Fitzroy Swimming Pool on Alexandra Parade, the "Fitzroy baths" whose "Aqua Profonda" sign was given a State level heritage listing in 2004, Wikipedia records. For air conditioning, the mix is the point. On a Contributory-heavy street such as Westgarth Street, the 4 metre side setback is the condition most addresses would be checked against, while the Not contributory apartment and townhouse rows on Rose Street and Leicester Street sit under the 2 metre figure and, for blocks with an owners corporation, its written approval. Walls facing Garryowen Park are in view of a public park under the plan.

Reverse Cycle Air Conditioning in Fitzroy
Ducted Air Conditioning in Fitzroy

Keeping Fitzroy Heritage Homes Warm: Heat Pump Sizing and Whole-Terrace Ducted Heating

The Australian Government's Energy Rating site notes that air conditioners can also be known as heat pumps, and a reverse cycle model is the type that heats as well as cools. Its climate zone lookup, run for postcode 3065 on 19 November 2026, places Fitzroy in the label's cold zone, where the label assumes 2,660 hours of heating a year against 545 hours of cooling. On the label's own assumptions, then, heating is the larger job for a heat pump here. The two H3s below cover sizing a heat pump for an old building's fabric, and heating a whole terrace through ducts.

Uninsulated, Single-Glazed Heritage Homes: Sizing Heat Pump kW Once the Draughts Are Sealed

Yarra City Council's guide to energy efficiency for heritage buildings states the starting point plainly: most heritage buildings in Yarra were built at a time when insulation was not considered and the only windows available were single glazed. It adds that heritage buildings can have a significant problem with draughts and air leakage, because cracks and gaps open as a building moves and ages, and it singles out gaps between exposed timber floorboards, and old fireplaces, which can be closed with a chimney damper when not in use. The council's recommended order is to block draughts first, then install insulation, aiming for at least R4.0 in ceilings, then retrofit double glazing. On permits, the same page says blocking draughts does not require a planning permit and ceiling insulation does not usually require one, while double glazing is a question for the council's planning team on 9205 5373. That order matters for the heat pump. Neither Mitsubishi Electric nor Brivis publishes a room-size-to-kW table: Mitsubishi says sizing is not as simple as square metres and calls for a heat load calculation, and Brivis lists floor area, ceiling height, insulation and glazing, orientation and climate zone as the inputs. Insulation and glazing are on both lists. As a general rule of installer practice, not a council statement, a heat load worked out after the gaps are sealed and the ceiling is insulated comes out lower, so the heat pump chosen can be smaller than one sized for the house as it stands today. When comparing models, the Zoned Energy Rating Label's capacity panel shows heating output in kW at two outdoor temperatures and cooling at one, and the Energy Rating site says the higher the kW value, the more heating the unit gives at that temperature. So the sequence is fabric first, then the heat load, then the kW figure on the label.

Ducted Heating for a Whole Terrace: Gas Ducted Through the Subfloor or a Ducted Heat Pump

For heating every room of a terrace from one system, there are two paths: keep or replace a gas ducted heater, or move to ducted reverse cycle. YourHome, the Australian Government's guide, says ducted heaters circulate hot air through roof or underfloor ducts, using gas or electricity, and that electric systems may also cool. It notes that floor outlets are often better than ceiling outlets for heating because warm air rises, and that ceiling outlets can work too, particularly when rooms are sealed from draughts, which ties back to the fabric work above. For gas, the Brivis range on Rinnai's site runs from the StarPro 6, with a 6 star gas efficiency rating, to the Buffalo BX3C, which Rinnai lists for easy changeover, and the brand notes that gas ducted needs ductwork and enough roof or underfloor space. Where the floor is suspended timber, the heater and ducts can go beneath it: the Brivis Classic installer's manual has its 2PWN internal range designed for the roof or beneath the floor. For a heat pump, Daikin lists Inverter Ducted Underfloor variants, which it calls ideal for homes in colder climates where heating is a focus, and Braemar's Dominator Series 2 is an all-electric reverse cycle unit made to fit the ceiling space and replace an existing gas heater while leaving the other components in place. The energy.vic.gov.au page on all-electric homes sets out the bill side: a dual-fuel home pays two bills and two service charges, an all-electric home one of each, and existing homes without solar can save around $1,900 a year by switching all gas appliances to efficient electric ones. A gas heater that stays in should be serviced at least every two years by a qualified gasfitter, Energy Safe Victoria recommends. Options for ducted heating, gas and electric, are compared in more depth on that page.

Air Conditioning Service and Repair Fitzroy for Inherited and Ageing Systems

The ABS 2021 Census counts 58.8% of Fitzroy homes as rented, against 28.5% across Victoria, with 20.1% owned with a mortgage and 18.0% owned outright. Whether a home is rented or bought, a system that came with it has a history its new occupant may not know. Evaporative coolers are outside the services offered here, so the page does not cover them; the jobs below are for refrigerated split, multi-head and ducted systems and for gas ducted heaters. The three H3s run in a practical order: a clean and first service for a split system, a first service for an inherited gas heater, then fault finding when an older unit stops.

Aircon Cleaning and a First Service for a Unit With No Service History

After moving into a home with a split system already on the wall, the first question is when it was last looked at. The ARC and AIRAH refrigerant handling code of practice expects an installer to hand over operating and maintenance instructions, a logbook and commissioning data, and where none of that came with the home, the first visit sets the baseline. The Quote Yard, a Victorian cost guide, calls annual servicing the sensible default for a domestic system in Victoria, and says a service record should contain more than a receipt for payment. QuickAir, a Melbourne installer, says a service takes about an hour for one unit, longer when the outdoor unit is hard to reach or several indoor heads are being serviced. A service and a clean are different jobs, and Mr Duct Cleaning, a Melbourne cleaner, says so directly: a clean is not a service, and regassing and repairs need an ARC licensed technician. Its clean has the room covered and a wash bag fitted, the filters washed, the coil and fins foamed and brushed, the barrel fan scrubbed, a low-pressure rinse into the bag rather than onto the wall, the outdoor unit cleaned, and an airflow and temperature test at the end. The signs it lists that a unit is due are a musty or sour smell in the first minute after start-up, black specks or dark marks on the louvres, and weaker airflow than the summer before. Those signs describe the unit's coil, fan and tray, not the room air or the people in it. Aircon cleaning is set out step by step on its own page, along with how a clean differs from a service.

Inherited Gas Ducted Heaters: A First AS 4575 Service, Carbon Monoxide Test and Duct Clean

A gas ducted heater that came with the home needs its own first visit, by a different trade from the split system. The Building and Plumbing Commission says gas servicing work in Victoria must be carried out to AS 4575, mandatory since 1 June 2022, and that only plumbers registered or licensed in the specialised class of Type A appliance servicing can do it. The standard's Appendix E checklist includes carbon monoxide testing, and the customer receives the complete servicing record, with the heater's make, model and serial number, within 5 days. Energy Safe Victoria explains why the test matters: carbon monoxide is a gas that cannot be seen or smelt, any gas heater can spill it, and a heater that is old or has not been serviced for several years is one to consider replacing. In a rental, Consumer Affairs Victoria requires the rental provider to have a gas safety check done every 2 years by a gasfitter endorsed for Type A servicing, so the renter's part is to ask the landlord or agent for it, and the BPC says a copy must be given to the renter within 7 days on request. The duct clean is a separate job, and The Quote Yard says duct repairs and duct cleaning are separate jobs from a system service. Mr Duct Cleaning's duct guide says a duct clean covers the supply and return air ducts, registers, grilles and fans, using high-powered vacuums and air-pressure tools to lift debris without spreading it back into the home. It gives every 3 to 5 years as a rule of thumb, sooner with musty odours, dust building up around vents, recent renovations, or pests or droppings near vents, and notes that some homes in Melbourne's older suburbs have very limited access to underfloor or roof ducts, which adds labour time. Ducted heating service and repairs covers the heater side in full.

Older Units That Break Down: Fault Finding First, Then the Repair, Leak Fix or Regas

When an older unit stops, diagnosis comes before the repair. The Quote Yard's repair guide lists the parts most often fitted, from capacitors and contactors to fan motors, control boards, reversing valves and compressors, and calls capacitors and contactors wear items that fail somewhere around the eight to twelve year mark on most systems. It describes a reversing valve fault by its symptom: the system will do one of heating or cooling but not the other. Refrigerant is where an older unit needs the most care. The same guide says a sealed system does not consume refrigerant, so a low charge means a leak exists, and recharging without finding it means paying again next season. It says the leak must be found before anything is recharged, using electronic detectors, ultraviolet dye or a nitrogen pressure test, and its position decides the fix: a flare joint at the outdoor unit is quick to remake, a buried pipe run may have to be exposed, and a leaking coil frequently means a new coil. The recharge is then done by weight, to the data plate figure plus the pipe allowance, and the ARC and AIRAH code of practice rules out topping up a system known to be leaking. An older refrigerant is not a reason on its own to replace a unit: the Australian Refrigeration Council says existing R22 units can continue to be serviced with R22, and that after 2029 that will rely on recycled or reclaimed refrigerant. Whether to repair or replace comes down to the repair's cost against the unit's age, which air conditioning repair sets out alongside the common faults.

Reverse Cycle Air Conditioning in Fitzroy
Ducted Air Conditioning in Fitzroy

Fitzroy Air Conditioning Cost, From a First Split to Replacing Gas Heating

The figures below are indicative ranges from Melbourne cost guides and installers, each attributed to its source. They are not this business's prices, and a written quote follows an inspection. The three H3s follow the jobs above: a first split or a multi-head, ducted for a whole home with or without removing gas, and the cost of keeping a system running.

One Split System to Start, or a Multi-Head Across the Rooms: Install Prices

Whatsthedamage's Melbourne table, updated November 2026, puts a supplied and installed split system at $1,250 to $2,625 for 2.5 kW and $1,475 to $2,950 for 3.5 kW. Climate Control Solutions, a Melbourne installer, puts a 3.5 kW back-to-back job at around $2,100 to $2,600, adds about $250 per unit for removing an old one and allows roughly $450 for a new circuit. For several rooms, the same Melbourne table gives $4,200 to $7,900 for a 2-head multi-head system ($5,800 typical) and $7,350 to $12,600 for 4 heads ($8,900 typical). Climate Control Solutions compares the two routes directly: two separate 3.5 kW splits run about $4,600 to $5,800 installed, while a 2-head multi-head system lands around $4,000 to $5,200. Owners corporation approval adds time rather than a published fee.

Ducted Systems for Terraces and Converted Warehouses: Reverse Cycle Prices, With or Without Removing Gas

For ducted reverse cycle, whatsthedamage's Melbourne table gives $8,400 to $14,700 ($11,550 typical) for a 3-bedroom home, or a single-storey 4-bedroom with good roof access, and $12,600 to $23,100 ($16,800 typical) for larger, two-storey or room-by-room zoned homes. QuickAir's Melbourne guide puts a small 1 to 2 bedroom home at $5,000 to $8,000, a bracket worth knowing where the ABS 2021 Census average is 2.2 bedrooms per dwelling. A converted warehouse apartment is priced on the same drivers these guides name, bedrooms, storeys, zoning and roof access, rather than on its history. For an owner keeping gas, the Melbourne table puts gas ducted heating supply and install at $4,000 to $11,550 ($7,350 typical). For an owner removing gas, the Victorian Energy Upgrades program lists a discount of up to $5,530, and bill savings of up to $1,140 a year, when a ducted gas heater is removed or replaced with an efficient reverse cycle system. Its indicative figures are up to $2,520 for a 10 kW system, $4,200 for 16 kW and $5,530 for 22.4 kW, and the product must be program-approved, high efficiency and carry a minimum 5-year warranty, in a property more than 2 years old (energy.vic.gov.au, updated 29 October 2026). Ducted air conditioning covers zoning and layout in more detail.

Keeping It Running: Yearly Service, Fault Callout and Regas Price Ranges

The Quote Yard's Melbourne figures put a single split service at $140 to $230 and a ducted system with multiple zones at $280 to $500. Mr Duct Cleaning charges $180 for the first split system clean, $160 for the second, $150 for the third and $140 for each after that, including the outdoor unit and GST. For a fault, The Quote Yard's Inner Melbourne & CBD band, whose suburb list names Fitzroy, gives a callout of $160 to $280 and a typical repair total of $400 to $1,200, and says the callout is usually credited against the repair if it goes ahead; its fitted leak and regas figure is $400 to $900. For gas heaters, Climate Control Solutions gives $180 to $320 for a gas ducted service with no faults found, and homeupkeep gives $280 to $380 for a service with a carbon monoxide test. Duct cleaning is priced separately: The Quote Yard gives $250 to $600 in Victoria, and Mr Duct Cleaning starts at $260 for 5 outlets, plus $10 for each extra outlet.

air conditioning Services we offer In Fitzroy

Air Conditioning Installation in

Air Conditioning Installation

Split, multi-head and ducted air conditioning installation across Richmond, sized room by room for terraces, apartments and warehouse conversions, with a free written quote after inspection.

Split System Installation in

Split System Installation

Split system installation in Richmond for wall, floor console and multi-head units, with the outdoor position, pipe route and kilowatt size set out in a written quote.

Ducted Air Conditioning in

Ducted Air Conditioning

Ducted air conditioning for Richmond homes: standard, slimline and underfloor systems, zoned room by room, with an itemised written quote after a roof inspection.

Reverse Cycle Air Conditioning in

Reverse Cycle Air Conditioning

Reverse cycle air conditioning in Richmond sized for winter heating, with gas heater swaps, VEU discount checks and heating kW set out in a written quote.

Hydronic Heating in

Hydronic Heating

Hydronic heating in Richmond: radiator panels, in-slab and underfloor pipes, gas boilers and heat pumps, with servicing and a written quote after inspection.

Air Conditioning Repair in

Air Conditioning Repair

Air conditioning repair in Richmond for split, multi-head and ducted systems, with faults traced to the cause and a written quote before any part is ordered.

Emergency Air Conditioning Repair in

Emergency Air Conditioning Repair

Emergency air conditioning repair in Richmond for split and ducted systems, booked from 6am to 10pm, seven days, with the callout price confirmed before a technician is sent.

Hydronic Heating in

Air Conditioning Service

Air conditioning service in Richmond for split, multi-head, cassette and ducted systems, with filters, coils, drains, outdoor units and refrigerant pressures checked and a written record left.

Air Conditioning Repair in

Aircon Cleaning

Aircon cleaning in Richmond for wall splits and multi-head systems: filters, coil and barrel fan washed into a wash bag, the outdoor coil cleared and airflow tested afterwards.

Emergency Air Conditioning Repair in

Ducted Heating

Ducted heating in Richmond: gas ducted heaters from 3 to 6 stars, electric ducted heat pumps, old heater swaps and a written quote after a heat load check.

Hydronic Heating in

Ducted Heating Service and Repairs

Gas ducted heating service in Richmond to AS 4575: burners, heat exchanger and flue cleaned and checked, a CO spillage test, faults traced and repairs quoted in writing.

Air Conditioning Repair in

Commercial Air Conditioning

Commercial air conditioning in Richmond for shops, offices and mixed-use buildings: split, cassette, under-ceiling, ducted, packaged and VRF systems, itemised quotes and maintenance contracts.

FREQUENTLY ASKED QUESTIONS

air conditioning In Fitzroy

Everything you need to know about our air conditioning In Fitzroy

How much does it cost to get an aircon installed?

Melbourne cost guides give indicative ranges rather than fixed prices. Whatsthedamage's Melbourne table, updated November 2026, puts a supplied and installed split system at $1,250 to $2,625 for 2.5 kW and $1,475 to $2,950 for 3.5 kW, and Climate Control Solutions puts a 3.5 kW back-to-back job at around $2,100 to $2,600. The same Melbourne table gives $4,200 to $7,900 for a 2-head multi-head system and $8,400 to $14,700 for ducted reverse cycle in a 3-bedroom home. In Fitzroy the extras, such as the pipe run to an allowed outdoor position, removal of an old unit and owners corporation approval, are itemised in a written quote after an inspection.

Can an air conditioning unit go on the rear wall of a heritage house without a planning permit?

Yarra's heritage permit-exemption plan, dated July 2014, makes an air conditioner on a residential building permit exempt where it is attached to the rear wall or sits within the rear setback, for every heritage grading, even where it can be seen from a street or public park. The exemption does not apply to corner located properties or to places on the Victorian Heritage Register, and a building permit may still be required. A newer version of the plan may apply, so confirm the conditions for the address with Yarra City Council on 03 9205 5555 before the unit goes on. The answer turns on the address, so the council's confirmation is the one to rely on.

How do I find out the heritage grading of my property in the City of Yarra?

Yarra City Council points owners to its Database of Heritage Significant Areas, a March 2024 document that lists each property in a Heritage Overlay by overlay number and street, graded Individually Significant, Contributory or Not contributory, with Victorian Heritage Register places marked. To check whether a property is in a Heritage Overlay at all, the council suggests VicPlan or a free property report from land.vic.gov.au. The council's heritage overlay page calls Individually Significant the highest grading and Not contributory the lowest. If an entry is unclear, Yarra City Council can confirm it on 03 9205 5555.

Should I get my air conditioner serviced after moving into a new home?

It is a sensible first step, especially if no service record came with the home. The Quote Yard calls annual servicing the sensible default for a domestic system in Victoria, and QuickAir says a service takes about an hour for one unit. A gas heater is a separate job: Energy Safe Victoria recommends a service at least every two years by a qualified gasfitter, including a carbon monoxide test, and in a rental Consumer Affairs Victoria makes the rental provider responsible for a gas safety check every 2 years. If the split system smells musty when it starts or the louvres show dark marks, Mr Duct Cleaning lists those as signs a clean is due.

Can ducted air conditioning be installed in a Victorian terrace?

It can, where the roof space allows. Mitsubishi Electric describes its PEA-M-HAA ducted units as having a two-piece construction that is ideal for existing homes, and its installation manual has the fan and coil sections separated and rejoined on site. Daikin sells a Slimline ducted range for installations where ceiling space is at a premium, and Inverter Ducted Underfloor variants for homes where heating is the focus. Daikin also says retrofitting ducted into an existing home can be more complex, so the roof space or subfloor is inspected at the quote before ducted is weighed against a split in each room. In a Heritage Overlay, the outdoor unit's position is also checked against Yarra's exemption conditions.

Is it worth draught proofing an old house before installing a heat pump?

Yarra City Council's energy efficiency guide for heritage buildings puts blocking draughts first, ahead of insulation and double glazing, and calls it often the most cost-effective way to improve comfort and reduce heating and cooling bills. It names gaps between exposed timber floorboards and old fireplaces as common problems, and says blocking draughts does not require a planning permit. Heat pump sizing rests on a heat load calculation that takes in insulation and glazing, so as a general rule of installer practice a home sealed first can be fitted with a smaller unit. The council also suggests aiming for at least R4.0 ceiling insulation.

TESTIMONIALS

What Fitzroy Homeowners Say About Us

Request A Free Quote

GET A FREE QUOTE