Aircon Cleaning Richmond, Mould and Dust Washed Out of the Unit

Aircon cleaning Richmond households book is a different job from a routine service. A split system deep clean takes the unit apart far enough to wash the filters and front panel, foam and brush the coil, scrub the barrel fan, and rinse the loosened dirt into a wash bag hung under the unit, then clears the outdoor coil and tests the airflow. The aim is to remove the mould, dust and odour build-up that collects inside the unit. This page sets out what the clean includes, what Melbourne cleaners and cost guides charge, how a deep clean differs from a cheap filter-wash deal or a service, and the signs a unit is due. Peak Air Conditioning Richmond takes cleaning bookings from 6am to 10pm, seven days, with same-day visits where possible. Call 0468 046 042 to book a clean.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Richmond for Heating and Cooling for Aircon Cleaning

Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.

Peak Air Conditioning Richmond

Aircon Cleaning Richmond: Wall Splits, Multi-Head Systems and Cassettes

Aircon cleaning in Richmond starts with one question: what kind of indoor unit is on the wall or in the ceiling. Mr Duct Cleaning, a Melbourne cleaner, publishes a fixed price list for wall split systems and quotes multi head, cassette and ceiling units separately because, in its words, they are built differently. The type sets how the unit opens, where the wash bag hangs and how long the visit runs, so the three types below are taken one at a time.

Wall-Mounted Split System Cleaning

A wall-mounted split is one indoor head joined to one outdoor unit, and it is the type a deep clean is designed around. The indoor head opens from the front. Mitsubishi Electric's owner guide shows the front panel lifting until it clicks, then coming away at its hinges, with the filters unclipping from behind it. Behind the filters sits the coil, and below the coil sits the barrel fan that pushes air out through the louvres.

Height matters for the clean. Mitsubishi Electric's MSZ-AP installation manual recommends mounting the indoor unit 1.8 m to 2.3 m from the floor, so the work is done from a ladder with a wash bag fitted under the casing to catch the rinse water. Only some models let an owner reach the fan at all: Mitsubishi Electric says its own fan-cleaning steps apply to models fitted with a Quick Clean Body, and tells owners of other models to check the manual. In Richmond, where the ABS 2021 Census counted 53.0% of occupied dwellings as flats or apartments, a wall split is often the only cooling in the home, which makes its condition easy to notice.

Multi-Head Systems Cleaned One Indoor Head at a Time

A multi-head system runs several indoor heads from a single outdoor unit. Mitsubishi Electric's MXZ range shows how far that can go, from a two-port outdoor unit up to a six-port model, so one system can put a head in most rooms of a home. For a clean, each of those heads is a separate wash. The Quote Yard, a Victorian cost guide, notes that each head has its own filters, coil and condensate drain.

That is why the heads are cleaned one at a time. The dust sheets go down in one room, the wash bag goes on that head, and the filters, coil and barrel fan are cleaned and rinsed before the bag comes off and the work moves to the next room. A head left out of the visit keeps its own build-up, so the number of heads is confirmed at booking. The shared outdoor unit is cleaned once, after the indoor heads. When the clean is finished, the heads are run and tested together, since they share one outdoor unit. Mr Duct quotes multi head systems before starting, and asks for a photo of the unit to price it.

Cassette and Ceiling Units Built Differently and Quoted Separately

A ceiling cassette sits recessed into a suspended ceiling. Mitsubishi Electric describes its cassettes as designed to be recessed into the ceiling, with four-way or one-way airflow, and its owner guide says ducted, cassette, bulkhead systems and outdoor units may require professional cleaning methods. As a general description of how a cassette is built, it is cleaned from below: the grille and filter come down first, and the coil and fan are reached from underneath, so the rinse runs downwards and has to be caught overhead rather than against a wall.

That different layout is the reason given by Mr Duct for quoting these units separately, and no Melbourne guide in this site's research publishes a cassette or ceiling-unit cleaning price. A cassette clean is therefore quoted after the unit has been seen or photographed. A ducted system is different again: its fan coil sits in the roof space or under the floor and is quoted on its own. Cleaning the ductwork itself is a separate trade job, covered with ducted heating service and duct cleaning, and is not part of a split system deep clean.

Clifton Hill Aircon Cleaning
Carlton Aircon Cleaning

Peak Air Conditioning Richmond

What a Professional Split System Deep Clean Includes

A split system deep clean follows a set order, and Mr Duct Cleaning publishes its own version step by step: room covered and wash bag on, filters washed, coil foamed and brushed, barrel fan scrubbed, steam, a low pressure rinse, a sanitise and deodorise step, the louvres and casing, the outdoor unit and a final airflow and temperature test. Mr Duct says this level of clean is advertised elsewhere as a chemical clean or a deep clean. The six steps below follow that order. How the room is protected is covered in the next section.

Filters and Front Panel Removed and Washed

The unit is switched off before anything comes apart. Mitsubishi Electric's owner guide says to switch off first, and notes that the main power isolation switch is generally found on the outdoor unit. The front panel comes off next. The same guide says the panel can be wiped with a dry cloth or rinsed in lukewarm water and dried with a soft cloth, and that dust on it can restrict airflow and reduce the unit's efficiency.

The filters come out from behind the panel. Mr Duct's process has them washed and refitted dry, and Mitsubishi Electric says light dust can be vacuumed off at low power while heavier dirt is washed in lukewarm water and left to dry. Some Mitsubishi Electric models carry a second, finer Air Cleaning Filter inside the main filter frame, which the maker says should be cleaned every three months and replaced once a year, so it is checked for wear rather than simply rinsed again. With the filters out, the coil and fan behind them are open to view, and the rest of the clean starts from there. The owner's own filter routine between cleans is set out in the FAQ below.

Coil and Fins Foamed and Brushed

The coil is the heat exchanger that cools the air passing through it, built as a block of thin metal fins around the refrigerant tubing. Dirt that passes the filter settles in those fins. QuickAir's service checklist puts it plainly: deeper dirt sits well beyond anything a filter wash reaches. Mr Duct's step is to foam and brush the coil and fins, and it says the cleaning foam goes deep into the coil to lift the dirt and mould.

The fins are soft and easily flattened. Mitsubishi Electric tells owners not to touch the metal coil or fins with bare hands, and to vacuum only in a vertical action, following the fins. As general practice, brushing follows the same line, with the fins rather than across them, so the gaps stay open for air to pass. The product matters too. Mitsubishi Electric's guide says to use only diluted mild detergents and never benzene, thinner, polishing powder or insecticide on the unit, which is a useful test for any coil cleaner a household is offered. Mr Duct also warns that spraying without the right covers can bend the fins.

Barrel Fan Scrubbed Where Dust and Mould Collect

The barrel fan is the long, cylindrical fan below the coil. Mr Duct describes it as the fan that blows air into your room, and its process brushes it by hand. The fan matters because of where it sits. Mr Duct's guide says the water a split makes while cooling sits on the coil, the barrel fan and in the drain tray, and that a damp, dusty unit is exactly where mould grows. It names the coil and the barrel fan as the parts that grow mould and cause the smell when the unit starts.

Manufacturers treat the fan as a place where mould can take hold too. Mitsubishi Heavy Industries Air-Conditioners Australia says the fan in its split systems has had a specialised anti-microbial treatment to help inhibit the growth of odour causing mould, and reading that as a sign the fan is a known trouble spot is this page's inference, not the maker's words. Cleaning the fan is fiddly work. Mitsubishi Electric's owner steps, for Quick Clean Body models only, take the horizontal vane off and run a brush along the fan blades. On other models the blades are reached through the outlet with the unit open, and each section is brushed and turned until the whole barrel is done.

Steam and a Low-Pressure Rinse into the Wash Bag

Once the coil and fan have been foamed and brushed, the loosened dirt has to leave the unit. Mr Duct's process uses two steps for that. Hot steam goes through the coil and fan to disinfect what the foam loosened, and a low pressure rinse then carries the dirt out of the unit into the bag, in its words, not onto your wall. That is a treatment of the unit's internal surfaces, not of the room or the air in it.

The pressure is low for a reason. Mr Duct warns that spraying water or chemicals into a unit without the right covers and a wash bag can push dirt deeper, wet the electrics or bend the fins. Mitsubishi Electric goes further for owners: under no circumstances should water be applied to the inner workings of a heat pump. A professional rinse is the controlled exception. The wash bag is sealed against the casing below the coil, and as general practice the control board and wiring are covered before any water goes in, with the rinse water draining from the bag into a bucket. Mr Duct's guide adds that customers see before and after photos, the simplest record of what came out.

Outdoor Unit Coil Washed Clear of Leaves and Grime

The outdoor unit is part of the clean. Mr Duct's process clears its leaves, dust and cobwebs so the unit can get rid of heat properly, and its price list includes the outdoor unit with each indoor unit. QuickAir makes the same point from the other side: leaves, dust and plant growth block airflow at the condenser. In cooling mode the outdoor coil is where the heat taken from the room is released, so a matted coil makes the whole system work harder.

The outdoor coil also has a winter job. Mitsubishi Electric's MSZ-AP manual notes that the outdoor unit produces condensate during heating, so in a reverse cycle system its coil can be wet in the cold months as well as in summer. As general practice, the wash is a gentle rinse through the fins, from the inside out where the cover allows, to lift the film of dirt and grime rather than drive it further in. This is a coil wash only. Checks of the outdoor fan, the clearance around the unit and the electrical connections belong to a routine service, which is a different job.

Airflow and Temperature Test After the Clean

The last step is to show the clean worked. Mr Duct's process ends with an airflow and temperature test, checking the unit is blowing strong and cold before the technician leaves. The unit is put back together first, and the reassembly is part of the test. Mitsubishi Electric notes that if the horizontal vane is not refitted correctly, all the LED lamps blink when the power comes back on.

The system then runs in cooling while the air at the outlet is felt and measured against the room, as general practice. A short wait is normal. Daikin's global troubleshooting guide says a unit restarted soon after stopping waits about three minutes to protect itself, so a pause after the clean is not a fault. What the test can reveal is a problem the clean cannot fix. Mr Duct says a unit that blows warm air on cool, shows an error code or ices up needs a licensed technician, and any of those is written up and passed to air conditioning repair and regassing rather than treated as part of the clean.

Peak Air Conditioning Richmond

Aircon Cleaning Service from Peak Air Conditioning Richmond

An aircon cleaning service puts water, foam and dirt inside a furnished room, so how the room is protected and how the price is fixed matter as much as the clean itself. Peak Air Conditioning Richmond takes aircon cleaning service bookings from 6am to 10pm, seven days, with same-day visits where possible. The two headings below cover the home and the price.

Dust Sheets and Wash Bags in Furnished Apartments and Terraces

Richmond homes are smaller than the state average. The ABS 2021 Census counted 53.0% of the suburb's occupied dwellings as flats or apartments and another 30.7% as semi-detached, row or terrace houses, with an average of 2.2 bedrooms against 3.1 for Victoria. Wikipedia describes most of the suburb's houses as single-fronted Victorian homes on long, thin blocks, alongside converted warehouses such as The Malthouse and high-rise flats. In a smaller room there is less space to move a bed, a sofa or a desk out from under the wall split.

So the room is covered before the clean starts. Mr Duct's first step is to lay drop sheets and fit a wash bag under the unit to catch every drop, and the bag described above does the rest of the work at the wall. The sheets go over the furniture beneath the unit, the floor along the path to the door and any bench where tools are set down. In an apartment block the gear travels through a lobby and a lift, and in a terrace down a narrow hallway, so the walk through the home is covered as well as the room.

A Written Per-Unit Quote Covering Heads, Height and Access

Two cleaning quotes with the same total can describe very different jobs. Mr Duct's guide suggests asking whether the outdoor unit is included, whether the price includes GST, whether there is a callout fee, whether the coil and barrel fan are cleaned or only the filters, whether a wash bag is used and the room covered, whether before and after photos are given, and what happens if a fault is found.

A written quote answers those questions unit by unit. The price for each indoor head and the outdoor unit is confirmed in writing before the wash bag goes on, with the head count, the mounting height of each unit and the way in to it stated on the quote. A photo of each unit sent with the enquiry lets that quote be prepared before the visit. If something is found on the day that the quote did not cover, it is raised before any extra work is done, and in a rented home the approval comes from the owner or managing agent. That matters in Richmond, where the ABS 2021 Census counted 54.7% of homes as rented against 28.5% for Victoria.

Abbotsford Aircon Cleaning
Carlton Aircon Cleaning

Peak Air Conditioning Richmond

What Aircon Cleaning Costs in Richmond

The aircon cleaning figures below come from Melbourne cleaners, installers and cost guides, each re-read on 19 November 2026. They are indicative market prices, not Peak Air Conditioning Richmond's price list, and a written price is given once the units in the home are known.

Split System Deep Clean Prices for One Unit

For one wall split, Mr Duct Cleaning's guide says most Melbourne companies charge about $150 to $200. QuickAir's Melbourne cost guide puts a deep clean or chemical wash at $200 to $350, a row it describes as a chemical coil flush plus a mould and odour treatment. The two ranges overlap, and the gap between them is mostly scope rather than the unit itself.

Scope is worth checking line by line. Mr Duct's own price includes the outdoor unit and GST, and it says a very dirty unit takes longer but does not change its listed price. Its own list of questions to ask suggests other quotes may leave the outdoor unit out or add GST on top, which moves the comparison. The figure also assumes a wall split. Cassette, ceiling and ducted units sit outside these ranges, and no Melbourne source in this site's research gives a price for cleaning them, so they are quoted after the unit has been seen.

Lower Rates for the Second, Third and Extra Heads

Cleaning several units in one visit costs less per unit. Mr Duct Cleaning publishes its own sliding rate: $180 for the first indoor unit, $160 for the second, $150 for the third and $140 for each after that, including the outdoor unit and GST. On those figures two units come to $340 and three to $490. That is one Melbourne cleaner's own price, quoted here as a benchmark rather than as a market rate.

The rate applies to wall split systems, each with its own outdoor unit. The same cleaner quotes a multi head system, where several heads share one outdoor unit, separately. The saving comes from doing the work in a single visit: one trip, one set-up and one round of sheets and bags moved from room to room. A home with a split in the living room and another in the main bedroom gets the second unit at the lower rate on Mr Duct's list.

A Deep Clean Added to a Routine Service

Some households book the clean and a service together. Climate Control Solutions, a Melbourne installer, lists a split system service plus a deep clean at $250 to $400, against $150 to $250 for its split service alone. whatsthedamage.com.au's Melbourne table, updated November 2026, groups the two jobs in a single row, with an air conditioning service or clean at $105 to $335 per unit and $210 as typical.

The combined figure is only meaningful once the scope is clear. A row that groups service and clean together can cover anything from a filter visit to a full strip-down, so the quote should say whether the coil and barrel fan are cleaned as well as the refrigerant and electrical checks being made. Booking both on one visit saves a second set-up and a second day at home, and Climate Control Solutions' service-only figure gives the yardstick for what the clean adds on its own numbers.

Extra Charges for High Walls, Roof Mounts and Hard-to-Reach Units

Access is the main reason a cleaning price rises. Mr Duct Cleaning says its listed price covers an outdoor unit no more than 2 metres above the ground with safe, clear access. It says a unit high on a second storey wall or on a roof needs extra equipment, so an extra charge may apply, and that a unit in a tight or difficult spot takes longer and may cost more. It also notes that a minimum callout fee may apply depending on location.

None of the sources gives a dollar figure for those extras, so none is given here. In Richmond the question is worth raising at booking, given the high-rise flats, converted warehouses and two-storey terraces named in Wikipedia's account of the suburb. QuickAir's guide adds that difficult access adds labour time. The practical step is to say where each outdoor unit sits and how high each indoor head is mounted, so any access charge appears on the written quote rather than on the day.

Peak Air Conditioning Richmond

Deep Clean versus a Filter-Wash Deal or a Routine Service

Three jobs are sold under similar names: a cheap filter-wash deal, a deep clean and a routine service. They reach different parts of the unit, and choosing the wrong one is how a household pays twice. The two comparisons below set them side by side.

Budget Filter-Wash Deals and What They Leave in the Coil

Mr Duct Cleaning's guide says split system deals are advertised in Melbourne at well under $100, and that most of them cover a filter wash, a wipe of the cover and an antibacterial spray. That is real work, but it stops at the front of the unit. On Mr Duct's account, the deal leaves the coil and the barrel fan dirty, and those are the parts that grow mould and cause the smell in the first minute after the unit is switched on.

The spray is the part most likely to mislead. Mr Duct says a spray can make the room smell better for a few days but does not take the dirt out of the unit, so the smell comes back. QuickAir's checklist makes the same point about dirt: it sits well beyond anything a filter wash reaches. So the useful test of any deal is what it does not touch. If the price does not mention the coil, the barrel fan, a wash bag and a rinse, it is most likely a filter visit, and whatever has built up deeper in the coil stays there.

A Deep Clean versus a Routine Air Conditioner Service

A deep clean and a service overlap at the filters and parts of the coil, then go in different directions. Mr Duct's guide states it directly: a clean is not a service, and regassing and repairs need an ARC licensed technician. Its comparison table puts filters washed, the coil and fins foamed and steamed, the barrel fan scrubbed and the mould and musty smell removed on the cleaning side. Refrigerant checks and electrical repairs sit on the service side.

A service, as QuickAir lists it, covers an indoor coil clean, a drain flush, an outdoor unit clean, operating checks and a refrigerant assessment, and the full checklist is on the air conditioning service page. The symptoms point to the right booking. Mr Duct says a musty smell, black specks, weak airflow or a unit not cleaned in a year point to a clean, while warm air on cool, an error code or ice point to a licensed technician. A unit that is both dirty and faulty needs the clean and the repair, and the two can be booked together.

Abbotsford
Carlton Aircon Cleaning

Peak Air Conditioning Richmond

Signs an Air Conditioner Needs Cleaning

Mr Duct Cleaning lists the signs it sees most on Melbourne jobs, and Mitsubishi Electric names reduced airflow, unusual odours and higher electricity bills as signs a filter needs attention. The three most common are set out below. A burning smell is not one of them: Daikin's global troubleshooting guide says to stop the unit and turn off the circuit breaker, and it is a job for emergency air conditioning repair, not a clean.

A Musty or Sour Smell in the First Minute After Start-Up

The first sign Mr Duct lists is a musty or sour smell in the first minute after the unit starts. The timing is the clue: the smell arrives with the first push of air through the unit rather than building up over an evening. Noting when it happens helps at booking, such as whether it appears in cooling, in heating or both, and whether it began after the unit had sat unused for a season.

The filter is the first thing to check, because Mitsubishi Electric lists unusual odours among the signs a filter needs cleaning. If the smell is still there after the filters have been washed and dried, it is coming from further in. A smell that returns within days of an air freshener or a spray is the same sign. A smell that has a different character, such as hot plastic or burning, is not a cleaning matter and is handled as described above. Why the musty smell forms in the first place is explained in the mould section below.

Black Specks or Dark Marks on the Louvres

Mr Duct's second sign is black specks or dark marks on the louvres, or on the wall around the outlet. The louvres are the moving blades that direct the air, and they sit right at the mouth of the barrel fan, so whatever is on the fan tends to show there first. Marks on the wall beside or below the unit may come from the same air stream.

Specks alone do not say what they are. The Better Health Channel says mould often looks like fuzz or appears as a stain, smudge or discolouration, and that the most common moulds are black, green or white, but dust and grime can look similar. The useful check is to switch the unit off, open the louvres and look in at the barrel fan with a torch, without touching it. Dark build-up along the fan blades is a sign the fan needs cleaning. Wiping the louvres clears the marks that can be seen, but it leaves whatever is on the fan behind them, which is why the specks tend to come back.

Weaker Airflow Than Last Summer

Mr Duct's third sign is airflow weaker than the unit had last summer, or a room that takes longer to cool. It lists higher power bills for the same cooling alongside it. QuickAir explains the mechanism: dirty filters restrict airflow and make the unit work harder. Mitsubishi Electric adds that dust on the front panel can restrict airflow and reduce efficiency, so the drop can come from the front of the unit as well as deeper inside.

Before booking, Daikin's global troubleshooting guide suggests a few owner checks: the fan speed and mode settings, whether the filters are clean, whether furniture is blocking the unit, and whether windows and doors are closed. If the airflow is still weak with clean filters and the settings right, the coil and fan are the likely places, and the airflow test at the end of a clean shows whether the clean restored it. Air that moves well but stays warm on cool is, in Mr Duct's words, a job for a licensed technician, which makes it a repair rather than a clean.

Peak Air Conditioning Richmond

Mould and Odour Build-Up Inside the Unit

The Better Health Channel says mould grows best in damp and poorly ventilated areas, and that it only grows where there is enough moisture on a surface or humidity in the air. An air conditioner that cools a room makes that moisture inside itself. This section covers where the damp comes from, what the treatment step of a clean does to the unit, and how to keep moisture down between cleans. It is about the unit, not health: the Better Health Channel says to seek medical advice if you are concerned about the effects of mould.

Condensation on the Coil and Damp in the Drain Tray

Mr Duct Cleaning's guide says a split system makes water every time it cools, and that the water sits on the coil, the barrel fan and in the drain tray. As a general rule of how air conditioners work, the indoor coil runs colder than the room air in cooling mode, so moisture from the air condenses on its fins and drips into the tray below, then runs out through the drain line. Mitsubishi Electric's owner guide reflects that: it says the coil is best cleaned once the unit has been off for at least five hours, to avoid moisture or heat build-up.

On Mr Duct's account, that leaves the inside of a split damp after each cooling run, behind a closed cover. Better Health says airborne mould spores are common indoors and out, and that when they land on damp spots indoors they may begin to grow and spread. The Quote Yard adds that the drain pan and line block with biological growth and dust over time. A wet coil, a wet fan and a tray that seldom dries out are the conditions Better Health describes, which is why the build-up collects on those parts rather than on the casing.

Mould and Odour Treatment After the Coil Wash

Washing removes the dirt. The treatment step deals with what was growing in it. QuickAir's Melbourne cost guide describes a deep clean or chemical wash as a chemical coil flush plus a mould and odour treatment. Mr Duct's process puts the step after the steam and rinse, as sanitise and deodorise, so the musty smell is gone rather than covered up. Both describe a treatment of the unit's coil, fan and tray, not of the room air or the people in it.

The order is the point. As a general rule, a treatment sprayed onto a coil still caked in dust sits on the dust, while the same treatment applied after the coil wash reaches the metal and fins underneath. That is the difference from the spray-only deal compared above. It is worth asking which product is used and whether it suits the unit, since Mitsubishi Electric warns against benzene, thinner, polishing powder and insecticide on its units. Some models carry a factory treatment of their own, such as the anti-microbial fan in Mitsubishi Heavy Industries split systems, but that does not remove build-up that has already formed, and the treatment step is no substitute for a coil wash.

Keeping Moisture Down So Mould Is Slower to Return

No clean stops mould for good. The Better Health Channel says there is no practical way to eliminate all mould indoors, and that the way to control indoor mould growth is to control the source of moisture. It names opening a door or window to ventilate a room as the cheapest and easiest way of reducing moisture and humidity, along with exhaust fans, and lists reverse cycle air conditioning or mechanical dehumidification as further aids.

Inside the unit, the aim is to let it dry. Mr Duct suggests running the unit on fan only for a while after cooling to help dry it out inside. Some makers build a drying cycle in: Mitsubishi Heavy Industries describes a Self Clean operation designed to dry the internal components, including the fan and filters, started from the remote and recommended every few weeks. Other brands use other names, so the unit's manual is the place to check. In a rented home, Better Health says the owner should fix mould caused by building faults, while the tenant uses extractor fans and airs the home where possible. With 54.7% of Richmond homes rented in the 2021 Census, that split of responsibility is worth settling between owner, agent and tenant.

Abbotsford

TESTIMONIALS

What Our Aircon Cleaning Customers Say About Us

The Process

3 Step Process For Your Aircon Cleaning Needs

Call or Book Between 6am and 10pm

Call the one number any day between 6am and 10pm. The booking notes the system type, the fault or the job, the address, who needs to be present (owner, tenant, agent or building manager) and any building access rules. Same-day visits are arranged where possible.

Inspection and Written Quote

A technician inspects the site and the existing system or the planned unit positions, then gives a written quote listing equipment, labour, extras and old unit removal. For repairs, the diagnosis comes first and any part is quoted before it is ordered. Work starts once the quote is accepted.

Installation or Repair, Testing and Handover

Each trade works under the licence it needs: ARC for refrigerant, a BPC-registered gasfitter for gas and a licensed electrician for wiring. The system is then tested, the controls are explained, and paperwork such as a Certificate of Electrical Safety or a gas compliance certificate is handed over where the job requires one.

FREQUENTLY ASKED QUESTIONS

Aircon Cleaning In

Everything you need to know about our Aircon Cleaning In

How much is an aircon cleaning service in Richmond?

Mr Duct Cleaning's guide says most Melbourne companies charge about $150 to $200 to clean one wall split, and QuickAir puts a deep clean or chemical wash at $200 to $350. Mr Duct's own sliding rate is $180 for the first unit, $160 for the second, $150 for the third and $140 for each after that, including the outdoor unit and GST. Cassette, ceiling, multi head and ducted units are quoted separately, and high or hard-to-reach units may cost more. These are indicative market prices, and a written price is given for the units in the home.

How do I clean my air conditioner by myself?

Owners can safely clean the front panel and filters. Mitsubishi Electric's owner guide says to switch the unit off first, lift the front panel, unclip the filters, vacuum light dust at low power or wash heavier dirt in lukewarm water, then let them dry before refitting. It recommends doing this every two weeks in peak seasons for regular home use, or once a month for light seasonal use. The same guide says water should never be applied to the inner workings of the unit, so the coil and barrel fan are left to a professional clean.

Do DIY aircon cleaning kits work?

A spray-can kit can clean what it reaches, but it cannot catch what it loosens. Mr Duct Cleaning warns that spraying water or chemicals into a unit without the right covers and a wash bag can push dirt deeper, wet the electrics or bend the fins. It also says a spray can make a room smell better for a few days without taking the dirt out of the unit. Filter washing is the part a household can safely do, while the coil and barrel fan need the unit opened, the electrics protected and the rinse collected.

How often should a split system be deep cleaned?

Mr Duct Cleaning, a Melbourne cleaner, suggests a professional clean once a year, best booked in spring before the summer rush. That is one cleaner's guidance rather than a standard or a manufacturer requirement. Between cleans, Mitsubishi Electric asks owners to clean the filters every two weeks in peak seasons. A musty smell, black specks on the louvres or weaker airflow are reasons to book sooner than a year.

How long does aircon cleaning take?

Mr Duct Cleaning says most wall splits take around 1 to 2 hours each, depending on the size of the unit and how dirty it is. A home with several units takes longer in total, since each indoor unit is cleaned in turn. A unit in a tight or difficult spot also takes longer, as Mr Duct notes. Cassette and ceiling units are built differently, so their time is given with the quote.

Is aircon cleaning the same as an air conditioner service?

No. Mr Duct Cleaning puts it plainly: a clean is not a service, and regassing and repairs need an ARC licensed technician. A clean washes the filters, coil and barrel fan and removes the mould and musty smell from the unit, while a service, as QuickAir lists it, adds a drain flush, operating checks and a refrigerant assessment. Peak Air Conditioning Richmond can book both on the same visit when a unit needs both.

Request A Free Aircon Cleaning Quote

GET A FREE QUOTE