Ducted Air Conditioning Richmond, Every Room from Hidden Vents

Ducted air conditioning Richmond homes can use comes in more forms than a standard roof unit. A full-height fan coil suits a house with a roomy roof, a slimline unit fits a shallow ceiling, and an underfloor unit serves a house with no usable roof space at all. Richmond's housing makes the choice specific: most houses are single-fronted Victorian terraces on long, narrow blocks, and the ABS 2021 Census counted 66.2% of the suburb's homes with one or two bedrooms. Peak Air Conditioning Richmond surveys the roof space, sizes the system from a heat load calculation, plans the zones around how the house is used and itemises the system, ducts and access in a written quote. Bookings run from 6am to 10pm, seven days. Call 0468 046 042 for a free written quote.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Richmond for Heating and Cooling for Ducted Air Conditioning

Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.

Peak Air Conditioning Richmond

Ducted Air Conditioning Richmond: Standard, Slimline and Underfloor Systems

A ducted system heats and cools several rooms from one hidden indoor unit, and the difference between the main types is where that unit lives: in a standard roof space, in a shallow ceiling or bulkhead, or under the floor. Daikin describes the result the same way for all of them: once installed, only the controller, the return air grille and the discharge grilles are visible inside the home. The four choices below are what ducted air conditioning Richmond owners usually weigh up.

Inverter Ducted Systems Hidden in the Roof Space

The standard layout puts one outdoor unit outside and a central indoor unit, often called the fan coil, in the roof. Daikin explains that the outdoor unit compresses the refrigerant and sends it to the indoor unit, which then pushes warm or cool air through ductwork to each room zone, all run from one zone controller. Daikin lists variable-speed inverter compressors for precise temperature control among the key features of its ducted systems, and notes that most of them use R-32 refrigerant. Mitsubishi Electric's PEA-M-HAA ducted range covers 10 to 16 kW. Daikin also points its newer Inverter series at houses with limited roof and outdoor space, a useful option in a suburb of small blocks.

Slimline and Bulkhead Units for Low Ceiling Cavities

Not every ceiling has room for a full-height fan coil, and slimline units exist for that gap. Mitsubishi Electric's PEAD series stands just 250 mm high across its 5.0 kW to 14.0 kW range, made, in the brand's words, for low ceilings and tight bulkhead cavities where a conventional ducted unit will not fit. Daikin sells a Slimline ducted series for installations where ceiling space is at a premium, listing narrow ceiling spaces and bedroom air conditioning among its uses, and a separate Bulkhead range for drop ceilings and shallow ceilings. The two products do different jobs. Mitsubishi Electric is clear that a bulkhead system serves a single room, while a ducted system serves several, so a slim unit boxed into a hallway bulkhead suits one bedroom, not a whole house.

Underfloor Ducted Units Where the Roof Space Will Not Work

Some houses have no usable roof space at all, and ducted air does not have to come from above. Daikin sells Premium Inverter Ducted Underfloor and Inverter Ducted Underfloor models, and describes underfloor systems as an ideal solution for homes in colder climates where heating is a focus. The heating logic is simple. The Australian Government's YourHome guide notes that floor outlets are often better than ceiling outlets for heating, because warm air naturally rises from where it enters the room. Daikin's own framing puts heating first, so for a home where summer cooling matters most, a roof or bulkhead unit is usually weighed against it. Whether a given Richmond house has enough subfloor height and access for an underfloor unit is not something a plan can show, so it is checked by going under the floor at the inspection.

Reverse Cycle or Cooling-Only Ducted Systems

Ducted systems are sold in two forms, and Daikin lists both for its ducted range: reverse cycle, which heats and cools, and cooling only. The Australian Government's Energy Rating site groups air conditioners the same way, as cooling only, heating only, or heating and cooling, which it calls reverse cycle and notes are also known as heat pumps. A cooling-only ducted unit leaves winter heating to something else, such as an existing gas ducted heater or room heaters. A reverse cycle unit runs the same ducts in both seasons, so one system and one controller handle the whole year. How reverse cycle heating works, and where it fits beyond ducted homes, is covered on the reverse cycle air conditioning page. Which of the two suits a home comes down to what heats it now, set out further down this page.

Clifton Hill Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

Ducted Air Conditioning Installation, From Roof Survey to Airflow Balancing

A ducted system is only as good as its install. Mitsubishi Electric's installation manual for the PEA-M-HAA ducted range sets out the work in order, and the Australian Government's YourHome guide adds the duct design rules. The four stages below run from the first look in the roof to the last check on the airflow.

Roof Space Survey and Fan Coil Location

The survey decides where the fan coil can sit and whether the roof can carry it. Mitsubishi Electric notes that a qualified installer assesses the roof space and decides the most suitable approach for routing the ductwork. The installation manual adds the conditions the chosen spot must meet: a ceiling structure strong enough for the unit's weight, a position where supply and return air are not blocked, a short path for the refrigerant pipes to reach the outside, and room for the supply air to spread through the house. It also asks for enough service space around the unit to inspect and replace the motor, fan, drain pump, heat exchanger and electrical box, clear of beams, with access doors drawn at 450 by 450 mm and 600 by 600 mm. A roof that runs hot and humid, with a dew point above 26 °C for long hours, calls for 10 to 20 mm of extra insulation over the whole unit.

Matching System Capacity in Kilowatts to the Floor Plan

Ducted systems are sold by capacity in kilowatts. Mitsubishi Electric's PEAD slimline series runs from 5.0 to 14.0 kW and its PEA-M-HAA range covers 10 to 16 kW, while the Victorian Energy Upgrades program prices its ducted discounts at 10 kW, 16 kW and 22.4 kW. Picking a figure from floor area alone is the common mistake. Mitsubishi Electric states that sizing is not as simple as looking at a home's square metres and calls a professional heat load calculation essential. Rinnai, in its guidance for Brivis ducted heaters, lists what that calculation weighs: total floor area, ceiling height, insulation and glazing, orientation and climate zone. YourHome's advice is simply to make sure the system is the right size for the house. The heat load result, not a rule of thumb, settles the kilowatt figure, and the zones planned for the home are checked against it.

Insulated Duct Runs, Taped Joints and Outlet Placement

Ducts are where a ducted system gains or loses its efficiency. YourHome warns of condensation, air leakage and lost heating or cooling energy when ducts are not adequately insulated and sealed, and sets the standard plainly: duct runs should be straight and all joints tightly taped. Mitsubishi Electric's manual asks for a canvas connector between the unit and the ductwork, incombustible material for duct parts, and full insulation on the inlet flange, the outlet flange and the outlet duct so condensation cannot form. It also has the unit's external static pressure set to 50, 100 or 150 Pa to match the ducts and grilles actually fitted. Outlet position matters too. YourHome notes that floor outlets often heat better because warm air rises, while ceiling outlets work well, particularly when rooms are sealed from outside draughts.

A Return Air Path from Every Room

Air pushed into a room has to find its way back to the fan coil. YourHome calls a return air path from every outlet back to the central system important, and gives the usual method: a gap under the door between the room and the central return air grille creates that path. Mitsubishi Electric's manual adds three rules for the return side: the air filter goes into the inlet grille before the inlet duct is connected, the inlet duct should be 850 mm or more long, and a false ceiling must never be used as a duct for the inlet or outlet air. Balancing comes last. The manual has the power on for at least 12 hours before the test run, which checks that cool air blows in cooling mode, warm air in heating mode and that the fan speed changes. Mitsubishi Electric's zone controller then lets the installer set each damper's maximum opening to balance the airflow between rooms.

Peak Air Conditioning Richmond

Why Choose Peak Air Conditioning Richmond for Ducted Work

A ducted job joins three trades in one roof: refrigerant work, electrical work and duct work. Peak Air Conditioning Richmond has each part done under the licence it requires, and the three points below explain what that means and what the paperwork should show at the end.

Refrigerant Handling Licensed Under the ARC Scheme

The Australian Refrigeration Council states that anyone who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and its definition of handling covers installing, commissioning, servicing and maintaining that equipment, whether or not refrigerant is present. On a ducted system the refrigerant work is substantial. Mitsubishi Electric's PEA-M-HAA manual names faulty flaring as the main cause of gas leakage, sets the flare nut torque, and has the lines evacuated for more than 15 minutes, then held for one or two minutes to confirm the gauge stays at minus 0.101 MPa. Its pipe runs carry no extra charge up to 7 m; beyond that, the prescribed amount of refrigerant is added. The ARC's Cool Change bulletin requires a pressure test before evacuation on all piping. A buyer can ask to see the technician's licence. The manufacturer warranty applies when the system is installed to the manufacturer's requirements.

A Certificate of Electrical Safety for the Dedicated Circuit

Mitsubishi Electric's manual makes a dedicated circuit part of the job: it instructs that electrical work follow the manual and use an exclusive circuit, and warns that a power circuit without enough capacity can cause a fire or an electric shock. It also calls for an earth leakage breaker where the location is humid, and an insulation resistance check of at least 1.0 megohm on the power terminals before the first test run. Energy Safe Victoria requires a Certificate of Electrical Safety for that kind of work under the Electricity Safety Act 1998, and the electrician must give the customer a copy, within 30 days for non-prescribed work, while prescribed work is also inspected by a licensed electrical inspector. The certificate deserves a place in the home's records, because Victorian rental providers must have electrical installations checked by a licensed or registered electrician every 2 years.

An Itemised Written Quote After the Roof Inspection, Booked 6am to 10pm

A ducted price depends on things no one can see from the street, so the quote follows the roof inspection rather than a phone call. The written quote itemises the system size in kilowatts and the indoor unit type, the number of zones and the controller, the duct layout with each supply outlet and return air grille marked, and whether existing ductwork is being reused or replaced. It also names the fan coil position and how it gets into the roof, the outdoor unit position, any ceiling reinforcement, and the expected timing. With those lines on paper, two quotes can be compared item by item. Inspections can be booked from 6am to 10pm, seven days, with same-day visits where possible. That matters in Richmond, where the ABS 2021 Census counted 54.7% of homes as rented, so a landlord, an agent and a tenant often need a time that suits all three.

Abbotsford Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

What Ducted Air Conditioning Costs in Richmond

The figures below come from independent cost guides published in 2026, with one older national guide marked as such. They are indicative ranges, not the business's own prices, and the real figure is set in the written quote after the roof inspection. Richmond's housing shapes which band applies: the ABS 2021 Census counted 66.2% of the suburb's dwellings with one or two bedrooms and only 6.2% with four or more.

Ducted Prices for a One or Two-Bedroom Apartment or Terrace

QuickAir's 2026 Melbourne guide puts ducted air conditioning for a small 1 to 2-bedroom home at $5,000 to $8,000 installed. Hipages, a national guide last updated in March 2025, gives the same $5,000 to $8,000 for an apartment or small home, so the band is consistent even if the national figure is older. With 53.0% of Richmond's dwellings counted as flats or apartments (ABS 2021), many small homes may have no roof space of their own, and a ducted system there depends on a usable ceiling void and owners corporation approval.

For homes this size it is worth pricing the alternative too. The whatsthedamage Melbourne table, updated November 2026, puts a supplied and installed 2-head multi-head split at $4,200 to $7,900, which overlaps the low end of the ducted band and needs no ductwork at all. The split system installation page covers that option, and a quote can set both side by side.

Ducted Prices for a Three or Four-Bedroom Home

For a 3-bedroom home, or a single-storey 4-bedroom with good roof access, the whatsthedamage Melbourne table puts standard ducted reverse cycle at $8,400 to $14,700, with $11,550 typical. QuickAir's Melbourne guide gives $8,000 to $10,000 for a medium 3 to 4-bedroom home and describes $8,000 to $14,000 as the typical three to four-bedroom outcome. Hipages' national figure of $6,000 to $10,000 for an average single-storey 3 or 4-bedroom home runs lower, as its national averages tend to. The spread inside each band reflects the system's capacity, the brand and model, the number of zones and how easy the roof is to work in. The 26.0% of Richmond homes with three bedrooms (ABS 2021) are the ones this band describes, provided the roof space is workable.

Two-Storey, Zoned and Premium System Prices

The top band covers bigger and more complex jobs. Whatsthedamage puts premium or zoned systems for larger 4-bedroom homes and up, two-storey homes, or room-by-room zoning at $12,600 to $23,100, with $16,800 typical. QuickAir gives $10,000 to $25,000 and up for a large or multi-storey home, and hipages' national range for a large multi-storey home is the same $10,000 to $25,000. A second storey means the ducts have to reach two levels, which the roof survey has to plan for before any price is fixed. Room-by-room zoning adds a damper motor and, on temperature-controlled systems, a sensor for each zone. Townhouses, which the Census groups with Richmond's semi-detached and terrace homes at 30.7% of dwellings, are where two-storey pricing is most likely to come up.

Extras for Tight Roof Access or Replacement Ductwork

Two items most often push a ducted quote above the base band. The first is ductwork. The whatsthedamage Melbourne table prices whole-house ductwork replacement, with new insulated flexible ducts, at $2,000 to $6,300, with $3,775 typical. The second is access. A low roof, a small manhole, a ceiling that needs reinforcing to hang the unit, or a fan coil that has to be split in two and carried up in pieces all add labour, and hipages puts installer labour at $80 to $110 an hour nationally. A long pipe run between the outdoor unit and the fan coil adds copper, insulation and refrigerant. These items are priced as separate lines on the written quote, so a buyer can see what the house itself adds to the price of the system.

Peak Air Conditioning Richmond

Ducted Reverse Cycle or Gas Ducted Heating with Add-On Cooling

For a home that already has gas ducted heating, the real choice is between ducted heating and cooling from one reverse cycle system and keeping the gas heater with cooling added on. Electric ducted heating from a reverse cycle unit and gas ducted heating are both set out on the ducted heating page. The three points below cover running costs, the add-on option and the discount for switching.

Heating Running Costs: Ducted Reverse Cycle versus Gas

The strongest figure comes from the Victorian Government. Its Victorian Energy Upgrades page lists energy bill savings of up to $1,140 a year when a ducted, whole-of-home gas heater is removed or replaced with an efficient reverse cycle air conditioner. Homeupkeep's Melbourne running-cost guide, updated June 2026, gives a 3-bedroom, well-insulated home about $300 to $550 a year to heat with reverse cycle against $700 to $1,100 with a 5-star ducted gas heater, at its own assumed tariffs. Going all-electric can also remove a bill: energy.vic.gov.au notes that a dual-fuel home pays two service charges, gas and electricity, while an all-electric home pays one. One caution applies to any ducted system. YourHome notes that ducted systems use extra energy for the fans that push air through the ducts, so zoning and well-sealed ducts help hold down the running cost.

Add-On Cooling for an Existing Gas Ducted Heater

Where a gas ducted heater still has years left in it, cooling can be added to the same ducts. Rinnai lists its Brivis Buffalo BX5C gas heater as a great choice for Brivis ICE add-on cooling, which can run its duct work under the floor or in the roof space. Braemar's range likewise includes ducted add-on cooling systems. Braemar also sells a different route, the Dominator Series 2, an all-electric reverse cycle unit made to replace the existing gas heater directly while leaving the other components in place. Either way, the existing ducts have to suit cooling as well as heating, which the ductwork check in the retrofit section below covers. The gas heater itself still needs a licensed gasfitter for its upkeep, covered on the ducted heating service and repairs page.

VEU Discounts for Replacing a Ducted Gas Heater

The Victorian Energy Upgrades program lists indicative household discounts for replacing a ducted gas heater with ducted reverse cycle: up to $2,520 for a 10 kW system, up to $4,200 for 16 kW and up to $5,530 for 22.4 kW. Smaller homes have another route. The program lists up to $2,940 for replacing a ducted gas heater with a multi-split system on one 10 kW outdoor unit, a useful option for a two-bedroom terrace. The product must be a high-efficiency reverse cycle air conditioner approved under the program, and where an existing system is replaced the property must be more than 2 years old. Removing or capping the gas heater is gas work, carried out by a licensed gasfitter registered with the Building and Plumbing Commission. The program also lists up to $2,520 where the ducted gas heater is replaced with four split systems, one of 8 kW and three of 3 kW.

Abbotsford Emergency Air Conditioning Repair
Carlton Emergency Air Conditioning Repair

Peak Air Conditioning Richmond

Ducted Zoning: Choosing How Many Zones the Home Needs

Zoning splits the ducted system into areas that can be turned on and off, so the home heats or cools only the rooms in use. Mitsubishi Electric's guidance is that the right zoning layout depends on the floor plan, the household's routine and the capacity of the ducted system. The three points below cover how zones are grouped, what the controllers can do and how zones are added later.

Day Zones for Living Areas, Night Zones for Bedrooms

The most common layout follows the household's day. Mitsubishi Electric suggests cooling the living areas during the day and switching to the bedrooms at night, and Daikin describes the same use: heating bedrooms at night while keeping living areas cool during the day. Richmond's typical house suits that split well. Wikipedia describes most of the suburb's houses as single-fronted Victorian homes with two bedrooms at the front and the family room and kitchen at the back, which gives a natural front night zone and a rear day zone. With only part of the house running at a time, the system serves a smaller area. Mitsubishi Electric's newer zone controller adds a weekly schedule of up to 10 programmed patterns, so the switch from living zone to bedroom zone can happen at a set time each evening without anyone touching the controller.

Four-Zone and Eight-Zone Controllers

Controllers are sold by the number of zones they can run. Mitsubishi Electric's ducted page describes its zone controller creating up to 4 or 8 separate zones, and its newer Zone Controller with Intelligent Comfort, in a May 2026 brochure, comes in 4 or 10-zone versions. The bigger difference is the damper type. On/off dampers simply open or close a zone, while linear dampers, on the brand's linear models, adjust the airflow so each zone holds its own temperature, set in 0.5 °C steps, using a sensor or wireless remote in that zone. A zone need not be a single room: the brochure notes that several sensors can average one zone where multiple bedrooms share a zone motor. For a two-bedroom Richmond home, a four-zone controller usually covers every room, while larger homes with several bedrooms, a study and a living area are where eight or more zones come into play.

Adding Zones to an Existing Ducted System

Zones can often be added without replacing the whole system. Mitsubishi Electric describes its newer zone controller as retrofit friendly, compatible with all current and some older indoor models, and able to work as an upgrade for older systems, with older model compatibility confirmed through the brand's support team. It accepts 24 VAC drive-open, drive-closed damper motors from different makers on the same system, which suits a house where some dampers are already fitted. A backing plate covers the old controller's mark on the wall. Capacity sets the limit. When most zones are shut, the fan still moves air, and the brochure's dynamic spill zone opens one nominated zone by the smallest amount needed to manage that excess airflow. Each new zone is a branch of the existing ducts with its own damper motor, so the duct layout found in the roof decides where a new zone can go.

Peak Air Conditioning Richmond

Retrofitting Ducted Air Conditioning into Richmond Terraces and Older Homes

Mitsubishi Electric states that ducted air conditioning can be installed in an existing home, and that the work requires access to the ceiling cavity. Daikin adds the honest caveat: retrofitting into an existing home can be more complex. In Richmond, where most houses date from the Victorian era, the three questions below decide how a retrofit goes.

Two-Piece Indoor Units Passed Through the Ceiling Hatch

A full-size fan coil is often too big to pass through an older home's manhole in one piece. Mitsubishi Electric builds its PEA-M-HAA ducted range in two pieces for this reason, describing it as ideal for existing homes and able to be installed through ceiling access. The installation manual explains how. The fan unit is separated from the coil unit, both halves are carried into the ceiling space, and they are screwed back together there before the unit is hung. The manual is firm that neither half may be suspended on its own, and that the joined unit hangs on M10 bolts, level, so its condensate drains. The route in is part of the plan too: the manual asks for the carry-in path to the installation site to be worked out before the unit arrives, so a narrow hatch is found at the inspection, not on the day.

Checking Whether Existing Ductwork Can Be Reused

An old gas heating system leaves ducts in the roof, and reusing them is tempting. Mitsubishi Electric's answer is that existing ductwork may be compatible with a new ducted air conditioner, depending on its condition, so the check comes before the decision. The inspection looks at the ducts against YourHome's standard: insulation intact, runs straight, joints tightly taped and the system sealed, since leaks and thin insulation cause condensation and wasted energy. Size is the second test. YourHome notes that ducts need to be larger if they also carry cooling, so heating-only ducts can be too small for a reverse cycle system even when they are sound. Daikin, for its part, offers its Premium Inverter series for retrofitting an old R22 ducted system. Where the ducts fail either test, replacement is quoted as a separate line.

Single-Fronted Victorian Terraces with Limited Roof Space

Wikipedia describes most Richmond houses as single-fronted Victorian homes built from the 1850s to the 1930s, typically on long, thin blocks with two bedrooms at the front and the family room and kitchen at the back. That shape sets the duct route. A central fan coil has to reach a front bedroom and a rear living room that may sit well apart along the length of the house, so the duct runs are long, and a fan coil placed towards the middle of the roof keeps the longest run as short as it can be. Roof space in a house of this age and width may also be shallow, which the survey confirms; where it is, the slimline units described above, or an underfloor unit, are the fallback. The outdoor unit is often placed at the rear, away from the narrow street frontage. Where the roof will not take ducts at all, a split system or multi-head layout is the honest alternative.

Abbotsford Emergency Air Conditioning Repair

TESTIMONIALS

What Our Ducted Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Ducted Air Conditioning Needs

Call or Book Between 6am and 10pm

Call the one number any day between 6am and 10pm. The booking notes the system type, the fault or the job, the address, who needs to be present (owner, tenant, agent or building manager) and any building access rules. Same-day visits are arranged where possible.

Inspection and Written Quote

A technician inspects the site and the existing system or the planned unit positions, then gives a written quote listing equipment, labour, extras and old unit removal. For repairs, the diagnosis comes first and any part is quoted before it is ordered. Work starts once the quote is accepted.

Installation or Repair, Testing and Handover

Each trade works under the licence it needs: ARC for refrigerant, a BPC-registered gasfitter for gas and a licensed electrician for wiring. The system is then tested, the controls are explained, and paperwork such as a Certificate of Electrical Safety or a gas compliance certificate is handed over where the job requires one.

FREQUENTLY ASKED QUESTIONS

Ducted Air Conditioning In

Everything you need to know about our Ducted Air Conditioning In

How much does ducted air conditioning cost for a 3 bedroom house?

Melbourne cost guides put standard ducted reverse cycle for a 3-bedroom home, or a single-storey 4-bedroom with good roof access, at around $8,400 to $14,700, with $11,550 typical (whatsthedamage, November 2026). QuickAir's 2026 Melbourne guide describes $8,000 to $14,000 as the typical three to four-bedroom outcome. Room-by-room zoning, a second storey or a premium system moves the price into a higher band of $12,600 to $23,100. These are indicative ranges, and a free written quote is given after the roof inspection.

How long should a ducted air conditioner last?

Daikin states that its ducted systems can last 10 to 15 years or more with proper care and maintenance. Its maintenance advice is to clean the indoor filters regularly, keep the vents clear and book an annual professional service. Mitsubishi Electric's ducted units can be set to show a filter reminder after a set number of running hours, which helps with the first of those. Ducts, outlets and the condition of the roof space also affect how well a system ages, so they are worth checking at each service.

Can ducted air conditioning be installed in an existing home?

Yes. Mitsubishi Electric and Daikin both state that ducted systems can be installed in existing homes, and Mitsubishi Electric notes the work needs access to the ceiling cavity. Two-piece indoor units, such as the PEA-M-HAA range, are made to pass through ceiling access in two halves. Existing ductwork from an old heating system may be reusable depending on its condition and size. Where the roof space is too shallow, slimline or underfloor units are the alternatives, and the roof survey shows which applies.

How many zones do I need for ducted air conditioning?

It depends on the floor plan, the household's routine and the capacity of the system, which is Mitsubishi Electric's own guidance. A common starting point is a day zone for living areas and a night zone for bedrooms, and a typical Richmond terrace, with bedrooms at the front and living space at the back, splits that way naturally. Controllers come in 4, 8 and 10-zone versions, and two-bedroom homes rarely need more than four. The zone plan is drawn up at the inspection and listed on the written quote.

How long does a ducted air conditioning installation take?

A ducted installation takes longer than a single split system, because it covers hanging the fan coil, running the ducts, fitting the outlets and return grille, connecting and evacuating the refrigerant lines, and the electrical work. Mitsubishi Electric's manual also asks for the power to be on for at least 12 hours before the first test run. A two-storey home, a tight roof or a two-piece unit that has to be assembled in the ceiling all add time. The written quote sets out the expected timing for the specific house, and Peak Air Conditioning Richmond confirms it before the job is booked.

Is ducted reverse cycle cheaper to run than gas ducted heating?

For most Melbourne homes, yes. The Victorian Energy Upgrades program lists energy bill savings of up to $1,140 a year when a ducted gas heater is replaced with an efficient reverse cycle air conditioner. Homeupkeep's Melbourne guide puts annual heating for a 3-bedroom, well-insulated home at about $300 to $550 with reverse cycle against $700 to $1,100 with a 5-star ducted gas heater, at its own assumed tariffs. Actual savings depend on the tariffs, the insulation and how well the ducts are sealed and zoned.

Request A Free Ducted Air Conditioning Quote

GET A FREE QUOTE