Commercial Air Conditioning Richmond, Planned Around the Business

Commercial air conditioning in Richmond covers shops on Swan Street, Bridge Road and Victoria Street, offices in Cremorne and the mixed-use buildings where a tenancy sits below apartments. Peak Air Conditioning Richmond works across commercial splits for a single trading room, ceiling cassettes for an open floor, under-ceiling units where there is no ceiling void, ducted or packaged plant for a larger tenancy, and VRF where many rooms need their own settings. The system is chosen at the quote, around how the business uses its space. Refrigerant work is done under an ARC refrigerant handling licence, and new circuits are wired by a licensed electrician who issues a Certificate of Electrical Safety. Quotes are itemised after a site survey, and maintenance contracts can be set at a quarterly or six-monthly cadence. Bookings run from 6am to 10pm, seven days. Call 0468 046 042.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Richmond for Heating and Cooling for Commercial Air Conditioning

Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.

Peak Air Conditioning Richmond

Commercial Air Conditioning Richmond: Split, Cassette, Ducted and VRF Systems

Commercial air conditioning in Richmond is not one product. Mitsubishi Electric says commercial air conditioners are designed for larger spaces, come in a wider range of larger capacities than residential models, and carry more sophisticated monitoring and control. The five parts below describe what each system type is. How to choose between them is covered in the comparison section further down.

Commercial Split Systems for Small Shops and Consulting Rooms

A commercial split pairs one indoor unit with one outdoor unit, the same layout as a home split, chosen for a room used through trading hours. Mitsubishi Electric's light commercial Mr Slim range offers wall-mounted units for smaller commercial areas or spaces with limited ceiling access, and the maker describes its PKA-M wall-mounted model as having a compact profile suitable for offices, meeting rooms and retail spaces. Its SUZ-M outdoor units, from 2.5 kW to 7.1 kW, are listed as ideal for light commercial applications, particularly shop front installations. That makes a split the simplest starting point for a single trading room or a small office. Wikipedia lists several medical facilities on Church Street and Bridge Road, and where a consulting room is a single closed room, one split serving it is the simplest layout; that is confirmed at the survey. The install basics of a wall hole, a pipe run and a drain are shared with home jobs and are set out on the split system installation page. On a commercial job the difference lies in the duty the unit carries, the controls staff will use and the access the building allows.

Ceiling Cassettes with Four-Way Airflow for Open-Plan Floors

A ceiling cassette sits recessed in the ceiling with only its grille showing, and it sends air out from the middle of the room rather than from one wall. Mitsubishi Electric says ceiling cassette air conditioners suit open-plan offices and retail environments requiring four-way airflow distribution, and that its PLA-M Series cassette mounts flush within suspended ceilings for balanced temperature control across large spaces. Capacities differ by model. The PLA-M-EA2 cassette spans 7.1 to 13.5 kW and lists a built-in drain pump. The SLZ-M four-way cassette spans 2.5 to 6.0 kW. The MLZ one-way cassette, at 2.5 to 5.0 kW, is a slimline design only 185 mm high. In Mitsubishi's words, installation generally requires mounting the indoor unit in the ceiling space and connecting it to the outdoor unit, which keeps wall and floor space free for shelving, displays or desks. A cassette therefore depends on a suspended ceiling with room above it, and that is the first thing the site survey checks on an open-plan floor.

Under-Ceiling Units for Premises Without Ceiling Space

Not every shop or office has a suspended ceiling to hide a unit in. Mitsubishi Electric's answer for that case is the ceiling suspended, or under-ceiling, unit, and the maker states that for premises without ceiling space, the PCA-M KA Series under-ceiling units provide a non-intrusive solution. These units mount directly below the ceiling surface and deliver directional airflow, and Mitsubishi lists them as suitable for restaurants, shops and commercial premises with exposed ceilings or heritage features where traditional ducted systems are not viable. The PCA-M-KA range covers 5 to 13.5 kW. A separate model, the PCA-M71HA2 at 7.1 kW, comes in a stainless steel casing with a replaceable oil mist filter, built for commercial kitchens, which is relevant to a café or restaurant fit-out. The unit stays in view, so it trades some ceiling appearance for avoiding work above the ceiling altogether. Its outdoor unit still needs a position and a pipe route, and both are settled at the survey.

Ducted and Packaged Systems for Larger Tenancies

Once a tenancy runs past a few rooms, the air can be moved through ducts from one concealed unit. A ducted split keeps the indoor unit in the ceiling or a plant space and the outdoor unit outside. Mitsubishi Electric's Mr Slim ducted units offer multiple external static pressure settings to suit different duct runs and zone controllers for individual areas, and its PUZ-M outdoor units, from 5.0 to 14 kW, work with ducted, under-ceiling and cassette indoor units. The ducted install basics are shared with homes and are covered on the ducted air conditioning page. A packaged unit is a different machine. Temperzone's technical data for its OPA rooftop range describes this type as compact and self-contained in comparison to split systems, which require long interconnecting piping, and says these packaged outdoor units are typically installed on a rooftop. Supply and return air run in ducts between the unit and the floor below, with horizontal or downward connections. Daikin says its UAYQ rooftop packaged units were developed specifically to suit commercial applications, and ActronAir lists its commercial packaged range for retail stores, offices, restaurants, cafés and warehouses. Temperzone's OPA 970 series also needs a 3 phase 400 V supply and correct clearances around the unit.

VRF and VRV Systems Running Many Indoor Units from One Condensing Unit

Variable refrigerant flow, or VRF, connects many indoor units to one outdoor condensing unit. Mitsubishi Electric describes its City Multi VRF as a system that allows for a vast range of applications, from commercial offices to apartment buildings, with connection to a variety of indoor unit models and capacities. Daikin sells the same idea under the name VRV. Scale varies widely by model. Mitsubishi's PQRY water-cooled heat recovery system connects 15 to 50 indoor units per condensing unit, and its PUHY air-cooled heat pump spans 22 to 150 kW. At the smaller end, Daikin's VRV S HSE, with capacities from 11.2 to 16.0 kW, is pitched at buildings from apartments and accommodation to cafés and restaurants. The indoor side is flexible: Mitsubishi's City Multi indoor range lists ceiling cassette, ceiling concealed, ceiling suspended, floor console and wall-mounted units, so each room can take the type that suits it. Mitsubishi also offers a Hybrid VRF, which carries refrigerant only as far as a branch controller and water from there to the indoor units, and the maker says these systems do not require refrigerant leak detection alarms in the occupied rooms.

Peak Air Conditioning Richmond

Commercial Installation, From Site Survey to Handover

A commercial install runs in three stages: a survey of the building, the plant and pipe work, and a handover that leaves the controls set and the paperwork with the owner. Each part below covers what is checked at that stage and why. The prices sit in the cost section, not here.

Site Survey of Ceiling Voids, Pipe Runs and Existing Pipework

The survey shapes the price more than the equipment list does. Whatsthedamage, a Melbourne cost guide, says that whether old pipework, ducts and mounting points can be reused, and how hard the plant is to reach, decides most of the spread between quotes. The technician looks at four things. The first is the ceiling: the guide names high, exposed or shallow voids as a driver, and a standard cassette needs a suspended ceiling with depth above it, while a slimline cassette or an under-ceiling unit may suit a shallow or missing void. The second is the pipe runs: where the outdoor unit can sit and how far refrigerant pipe, cable and drain must travel to reach it. The third is existing pipework. Mitsubishi Electric's Mr Slim range has a pipe re-use technology with a wide strainer that captures iron particles, and Daikin offers VRV retrofit units designed to reuse existing refrigerant pipework from R22 systems, so old pipe is not automatically scrap; the cost guide suggests asking each quote whether existing pipework passes a pressure test. The fourth is the refrigerant itself: Temperzone's R32 packaged data says the minimum floor area requirements of R32 refrigerant must be considered. The survey routine itself is general trade practice rather than a published standard.

Outdoor Plant on Roofs: Crane Access and Noise Near Neighbours

Larger outdoor units and packaged plant often go on the roof, and getting them there is a job in itself. Whatsthedamage lists crane and roof access for plant among its drivers, says small cranes and footpath traffic control may be needed on inner-city jobs, and advises coordinating crane lifts and roof access with the owners corporation and other lots in a strata building. On the roof, Temperzone's packaged data says nominal outdoor airflow and correct unit clearances, with no air recirculation, must be maintained for the unit to reach its rated performance, so the position is chosen for airflow and service access, not only for space. Noise is the other half. EPA Victoria counts noise from shops and offices as commercial, industrial and trade noise, which must not be unreasonable or exceed noise limits. Those limits depend on the planning zone, the location of noise-sensitive areas, the time of day and noise from other businesses nearby, and the EPA says businesses are responsible for noise made by the contractors or tradespeople they hire. The EPA co-regulates this noise with local government, which in Richmond is the City of Yarra. The EPA page, read on 19 November 2026, publishes no numeric limit, so none is quoted here. Equipment choice can help: Mitsubishi lists an Advanced Low Noise function on its PUHY outdoor units.

Controls, Zone Timers and Central Control Set Up at Handover

A commercial system is run by staff who were not there when it went in, so the controls are part of the install. Mitsubishi Electric's Mr Slim range offers handheld, wall, Bluetooth, Wi-Fi and zone controllers for individual units, plus central control options for running several systems, and its City Multi range adds individual and centralised control. At the larger end, its AE-C400E centralised controller lists annual and weekly schedules, energy monitoring and tenant billing, and control of up to 400 indoor units with an expansion module. Building management systems connect through optional interfaces, and ActronAir's packaged units accept manual inputs from third-party control. Whatsthedamage recommends zone timers so that studios, meeting rooms and print rooms run only in the hours they are used, and it lists controller and zone timer set-up at handover as a quote item. Handover also carries paperwork. The ARC and AIRAH refrigerant handling code of practice says the installer must provide operating and maintenance instructions including a logbook, commissioning data and test certificates, and it recommends training the system operator. The same code holds the leak tightness test pressure for a full day on initial system commissioning tests, against 1 hour when testing a repair.

Peak Air Conditioning Richmond

Why Choose Peak Air Conditioning Richmond as a Commercial Air Conditioning Contractor

Choosing an air conditioning contractor for a shop or office comes down to things a business owner can check on paper: who handles the refrigerant, who signs off the wiring, and what the quote actually lists. The three parts below cover each one. Bookings with Peak Air Conditioning Richmond run from 6am to 10pm, seven days, and a site survey can be timed around trading by agreement.

Refrigerant Recovered from Old Plant Under an ARC Licence

A replacement job starts with the old plant, and the old plant still holds refrigerant. The Australian Refrigeration Council states that any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and the 2025 code of practice it publishes with AIRAH says that licence scope includes decommissioning equipment in which scheduled refrigerant is present. The code is specific about what decommissioning means. All scheduled refrigerant must be recovered from all parts of the system, then reclaimed or disposed of under the code's recovery rules, and refrigerant must never be deliberately vented. The emptied equipment must be labelled as decommissioned and emptied of refrigerant, and that label must be dated and signed. The code adds that licensed technicians are required by legislation to observe it. Whatsthedamage lists the removal of old plant with recovery of its refrigerant, and the refrigerant handling licence number, among the items a compliant Melbourne quote should include, so a business owner can ask for both before work starts. The dated label on the old unit is the simplest record that the recovery was done.

A Certificate of Electrical Safety for New Plant Circuits

Commercial plant can need more electrical capacity than a domestic split. Temperzone's OPA 970 packaged units need a 3 phase 400 V supply, and Mitsubishi's PUZ-ZM outdoor units come in single and three-phase versions, with the 7.0 kW model single phase only. Mitsubishi Electric says a licensed electrician must complete the electrical connections on its installations, while a licensed refrigeration technician handles the air conditioning side. Where a job adds or alters a circuit, Energy Safe Victoria says a Certificate of Electrical Safety is required by the Electricity Safety Act 1998, and the registered electrical contractor or licensed electrical worker must give the customer a copy. The timing differs by class of work: within 30 days for non-prescribed work, and within 4 days of completing the certificate for prescribed work. The certificate is tied to new or altered electrical work, not to each service visit. Whatsthedamage lists the electrical connection and any switchboard work as a separate line on a commercial quote, which keeps the electrical scope visible before the job is booked.

An Itemised Quote Covering Units, Access, Controls and Maintenance Visits

A written quote after a site survey lets two contractors' prices be compared line by line. Whatsthedamage says a Melbourne commercial quote should state the heating and cooling duty and the access plan for the building before any comparison is made. Drawing on its checklist, an itemised quote names the number of indoor units, with the type and capacity for each zone in both heating and cooling. It states the access plan in plain words, while the costs of access are priced in their own lines. It lists the controllers and zone timers included, with their set-up at handover, the electrical connection and any switchboard work, the removal of old plant and recovery of its refrigerant, the refrigerant handling licence number and insurance details, and the maintenance visits per year with the tasks done at each. The guide also suggests checking whether each line is priced per job, per unit per year or by the hour. Warranty terms belong in writing too, because makers separate home and commercial cover: Mitsubishi Electric's 5-year parts and labour warranty statement is for residential applications, and Daikin lists 3 years parts and labour on new generation VRV H models. The manufacturer warranty applies when the system is installed to the manufacturer's requirements.

Peak Air Conditioning Richmond

What Commercial Air Conditioning Costs in Richmond

The figures below come from whatsthedamage, a Melbourne cost guide updated November 2026, which states that its figures include GST. They are the guide's own estimates for supply and installation, not survey data and not this business's prices. A written quote follows the site survey.

Commercial Split and Ceiling Cassette Prices

For a single room or shopfront, whatsthedamage puts a commercial split, supplied and installed, at $2,600 to $7,800 in Melbourne, and a ceiling cassette at $4,200 to $9,900. The two bands overlap, and capacity differs by model: Mitsubishi's PLA-M-EA2 cassette runs from 7.1 to 13.5 kW, while its light commercial wall splits start at 2.5 kW. Where a job lands in each band depends on the building. The guide says Melbourne jobs sit low when a split goes into a studio or shop with a back yard for the outdoor unit, and move towards the top of the cassette band when a tower allows work only outside business hours, when a Victorian-era shopfront has only a shallow ceiling void, or when a contractor crosses the city. It prices both as fixed jobs rather than hourly work. No source in this site's research ties a commercial price to a given kilowatt size, so capacity is priced at the quote once the room and its heat load are known.

Small Office, Ducted, Packaged and VRF Per-Unit Prices

For a complete small office system under about 200 m², new or a like-for-like replacement, whatsthedamage gives $7,800 to $15,600 supplied and installed, with $11,450 typical. A small ducted or packaged system for a larger commercial tenancy runs $12,500 to $31,200 a job in the same table. VRF and VRV are priced on a different basis, at $3,600 to $7,800 for each indoor unit, so the total scales with the number of rooms or suites served. The guide says controllers, pipe routing and the plant location make up the rest of a VRF price. That per-unit basis is why the count of indoor units is the first line to check on a VRF quote, and whatsthedamage lists the number of indoor units as a driver especially in VRF multi-zone systems. The small office row covers a whole system under one quote, so it is the band to compare against when a tenancy is weighing several splits against one ducted system.

Access, Crane Hire, After-Hours Work and Building Approval Costs

Four costs sit outside the equipment bands, and none of them has a published dollar figure in this site's research. Access comes first: whatsthedamage names access, including building management approval, as a driver, and says towers usually require booked loading docks, lift access, building management approval and work outside business hours. Crane hire is the second: the guide lists crane and roof access for plant, and says small cranes, after-hours deliveries and footpath traffic control on inner-city jobs can add cost and time. After-hours work is the third. It is an option to arrange when booking, and it raises the price. The only published multipliers in this site's research are residential repair-attendance figures: The Quote Yard says after-hours attendance carries a premium of fifty to one hundred per cent for air conditioning repairs in Victoria, and SureQuote gives 1.5 to 2.0 times nationally. Neither is a commercial installation rate, and neither is multiplied out into a dollar figure here. Building approval is the fourth: the guide gives no fee for it, but says older office stock and strata approval processes add lead time. Each of these is priced on the quote once the building has been seen.

Maintenance Contract and Hourly Service Rates

Ongoing costs are charged on their own basis. Whatsthedamage puts a maintenance contract with quarterly visits at $310 to $850 per unit per year in Melbourne, covering filters, coil cleaning, condensate treatment, electrical checks and, on ducted air-handling systems, the hygiene items AS/NZS 3666 expects. A refrigerant leak detection and regas is priced as a job, at $420 to $1,200. Labour outside a fixed price runs $100 to $170 an hour for commercial work in the same guide. For a national comparison, hipages gives $80 to $140 per hour plus GST for commercial air conditioning, against $80 to $110 per hour plus GST for domestic work. Because contracts are charged per unit, a site with several indoor units multiplies the per-unit figure by the unit count, which is why the unit list on the quote matters as much for servicing as it does at install. The tasks behind the contract price, and how often the visits fall, are set out in the maintenance section.

Peak Air Conditioning Richmond

Cassette, Ducted or VRF: Choosing Commercial Air Conditioning Systems

The system types are described in the first section; this one is the decision. Three questions settle most of it: how the floor is divided, whether some rooms need heating while others need cooling at the same moment, and how much ceiling and plant space the building offers. The sources give no numeric rule of thumb for any of them, so each is answered for the actual premises.

One Open Floor versus Many Rooms at Different Temperatures

An open floor and a partitioned floor ask different things of a system. For the open floor, Mitsubishi Electric says ceiling cassettes suit open-plan offices and retail environments requiring four-way airflow distribution, and Daikin offers a VRV air handling unit for commercial applications with large open spaces. For a floor divided into rooms or suites, Mitsubishi says its City Multi VRF heat pumps are ideal for commercial spaces that require varied temperature settings in different areas. Whatsthedamage reports the same pattern in its Melbourne pricing notes: ground-floor retail and hospitality tend toward cassettes or split systems, upper floors with several tenants often go to VRF so that each tenancy controls its own zone, and a converted floor let as one open studio can run on a single ducted or packaged unit. The same floor can change answer once it is partitioned. A tenancy with a few rooms can also be served by separate splits or by a ducted system with zone control, so VRF is one option rather than the default. No source gives a room count at which VRF becomes the better choice, so this page gives none.

Simultaneous Heating and Cooling with VRF Heat Recovery

Any reverse cycle system can heat or cool, and whatsthedamage notes that Melbourne systems can be heating at breakfast and cooling by mid-afternoon. Heat recovery answers a different question: whether one part of a building needs cooling at the same moment another part needs heating. Mitsubishi Electric presents that as the feature that separates its heat recovery range from its heat pump range, saying its VRF heat recovery system allows for simultaneous heating and cooling using patented 2-pipe technology and a multiple port branch box. Its air-cooled PURY heat recovery units run from 22 to 124 kW, and its water-cooled PQRY version offers heat recovery in both the refrigerant and water circuits. Mitsubishi also claims that its two-pipe design significantly reduces piping compared with traditional three-pipe systems, which is the maker's own claim. Daikin lists its 6th generation VRV R under heat recovery. So the decision turns on the building: if every zone wants the same mode at any one time, the heat pump range covers it, and if zones split between modes at the same time, heat recovery is the option to price. Which case applies is found by the heat load assessment, not assumed.

Ceiling Space, Visible Units and Outdoor Plant Footprint

The building's spare space often narrows the choice before comfort does. Inside, a cassette needs a suspended ceiling: Mitsubishi's PLA-M mounts flush within suspended ceilings, and its MLZ one-way cassette is 185 mm high. Without a ceiling void, the options become visible units, either under-ceiling models that mount below the ceiling surface or wall-mounted units for spaces with limited ceiling access. A ducted unit hides everything but the grilles, at the cost of ceiling or plant space for the unit and its ducts. Outside, the trade-off is plant area. Daikin's VRV S HSE uses a single fan casing of 870 by 1,100 by 460 mm across its range, Daikin says its VRV R design reduces the footprint of mechanical equipment and can reclaim leasing space in existing buildings, and Mitsubishi lists a reduced condenser footprint on its PUHY and PURY units. Where a building has a condenser water system, Mitsubishi's water-cooled VRF connects to it and replaces a large external condenser farm with units mounted inside. A rooftop packaged unit puts the whole plant on the roof, and Daikin says its UAYQ design has a flat top and compact form for a neat look in the line of sight.

Peak Air Conditioning Richmond

Commercial Air Conditioning Service and Maintenance Contracts

Commercial air conditioning service is scheduled work, set out in a maintenance contract with a visit cadence and a task list. A breakdown between visits is a repair job, covered on the air conditioning repair page, and an urgent failure on a hot trading day goes through emergency air conditioning repair.

Quarterly or Six-Monthly Visits Set by How Hard the System Runs

How often a commercial system is serviced depends on its duty, meaning how many hours it runs and how hard it works. Whatsthedamage gives filters, coils, condensate and general service as quarterly to six-monthly by duty, and it labels that basis as recommended practice drawn from manufacturer and industry cadence, with a full system condition review once a year. That is a cost guide's guidance, not a regulation. The refrigerant side has its own schedule in the ARC and AIRAH code of practice. The system instruction manual must include a time schedule for preventive maintenance with respect to leakage, and where the manual gives none, the code points to the AS/NZS 5149.4 recommended in-service leak inspection frequency. That frequency steps by refrigerant charge: after a repair or a suspected leak for systems of 3 kg or less, every 12 months above 3 kg, every 6 months above 30 kg and every 3 months above 300 kg. The manufacturer's manual comes first in every case. For a new system, the code also says the customer should be reminded when routine maintenance is due for at least two years after installation.

Filters, Coils, Condensate and Refrigerant Leak Checks

Each visit works through the same core tasks and records them. Whatsthedamage lists filters, coil cleaning, condensate treatment and electrical checks in a commercial maintenance contract, with refrigerant leak checks at each service and on any drop in performance. Filter access differs by plant: Temperzone's packaged units hold 50 or 100 mm panel filters behind a hinged door on the side of the unit, while a cassette's filter sits behind its ceiling grille. Coil cleaning is listed as its own task, separate from the filter. Condensate checks cover the drain and, on cassettes such as Mitsubishi's PLA-M-EA2, the built-in drain pump that lifts water out of the ceiling. The leak check follows the ARC and AIRAH code: an in-service leak inspection is done with the refrigerant in place and the system running as normal, and a system known to be leaking must not be topped up until all leaks are fixed. For systems holding more than 3 kg of refrigerant, the code requires a logbook that records maintenance and repair work, refrigerant charged or removed, component changes and test results. It also recommends a maintenance checklist such as AIRAH DA19, with a copy given to the customer after each service.

Hygiene Checks on Ducted Air-Handling Systems to AS/NZS 3666

Ducted air-handling plant brings one more standard into the contract. AS/NZS 3666.2:2011, titled Air-handling and water systems of buildings, Microbial control, Part 2: Operation and maintenance, is described by Standards Australia as specifying minimum requirements for the operation and maintenance of air-handling and water systems of buildings for the purposes of microbial control. Standards Australia also says it does not include requirements for refrigerated room air conditioners and non-ducted split systems, and whatsthedamage makes the same point, so a shop running wall splits sits outside it. The standard's contents list covers access for maintenance, the maintenance of air-handling systems, including outdoor air intakes and exhausts, air filters, humidifiers, evaporative air-cooling equipment and ducts and components, and operating and maintenance manuals and maintenance records. Whatsthedamage says a commercial contract on ducted air-handling systems covers the hygiene items AS/NZS 3666 expects, with records kept for building compliance. Standards Australia lists the standard as pending revision. This section describes the plant and its records only, makes no claim about health outcomes, and does not cover cooling towers.

Peak Air Conditioning Richmond

Commercial Air Conditioning in Richmond Shops, Offices and Mixed-Use Buildings

Richmond's commercial buildings are as mixed as its housing. Wikipedia places the suburb 3 km east of the CBD in the City of Yarra, says its residential segment exists among a lively retail sector, and lists three of the 82 major activity centres in the Melbourne 2030 strategy within it. The three building types below are the ones this page plans around, and each refers back to the system types described earlier.

Retail Shopfronts on Swan Street, Bridge Road and Victoria Street

Victoria Street, Bridge Road and Swan Street are the commercial strips Wikipedia names as Richmond's three major activity centres. Victoria Street is known for Little Saigon and carries tram routes 12 and 109, Bridge Road carries routes 48 and 75, and Swan Street carries route 70. The Cremorne article calls Swan Street one of Melbourne's most popular shopping strips, with restaurants, clearance shops, Edwardian and Victorian architecture, and an influx of cafés since the early 2000s, and it describes nearby Church Street, on tram route 78, as lined with furniture showrooms. Shopfronts constrain where the outdoor unit can go. Whatsthedamage says narrow retail frontages often leave only a rear lane, a roof or a side wall, that noise near neighbouring shops or flats can steer the choice toward a quieter model, and that heritage facades complicate condenser placement. Whether a particular shop has rear-lane access, and whether its facade carries any heritage control, is checked at the survey rather than assumed. On the equipment side, Mitsubishi lists its SUZ-M outdoor units for shop front installations and its PUZ-ZM units for layouts with longer distances between indoor and outdoor units.

Cremorne Offices and Converted Factory Buildings

Cremorne, bounded by the Yarra River, Punt Road, and Swan and Church streets, existed only as a locality of Richmond until 1999. Its Wikipedia article describes a chaotic mix of uses, with the Bryant and May and Rosella factories and the Nylex Clock beside Victorian cottages, modern townhouses, offices and light industries. In the mid 20th century, it says, hundreds of small to medium-sized factories were built and occupied by the rag trade, mechanics, printers and small engineering businesses, and from the 1990s the Richmond Power Station and the Bryant and May and Rosella factories were converted to office space. Richmond's own article records the Bryant & May, Jaques, Wertheim Piano and Pelaco works, named here as history only. Converted industrial buildings may have high or exposed ceilings, but that varies building by building. Whatsthedamage says brick warehouses in Richmond have high ceilings, exposed beams and narrow frontages, that ducted or packaged plant is common in converted warehouses in Richmond and Cremorne, and that a quote should ask whether roof insulation was allowed for in the sizing. Where there is no ceiling void, the under-ceiling units described above are Mitsubishi's stated option for exposed ceilings or heritage features.

Shops Below Apartments: Building Management and Owners Corporation Approval

Mixed-use buildings put a commercial tenancy beneath homes. Wikipedia gives a Richmond example of the form, a local shopping centre that sits below an apartment block, and the Cremorne article notes modern residential apartment development along Swan Street. For the shop tenant, the approval question is a commercial one. Whatsthedamage names building management approval as part of commercial access and says a quote should state whether landlord or owners corporation sign-off for roof plant is arranged by the client or the installer. Where the owners corporation has made no rule of its own on a point, Consumer Affairs Victoria's model rules apply. Rule 4.3(1) says an owner or occupier must not damage or alter the common property without the written approval of the owners corporation, rule 5.2(1) requires written approval before changing the external appearance of a lot, and rule 5.2(2) says approval cannot be unreasonably withheld but may carry reasonable conditions. Rule 5.3 asks the occupier to notify the owners corporation of works that may affect the common property. Plant placed under or beside the flats also brings in EPA Victoria's noise factors, one of which is the location of noise-sensitive areas.

TESTIMONIALS

What Our Commercial Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Commercial Air Conditioning Needs

Call or Book Between 6am and 10pm

Call the one number any day between 6am and 10pm. The booking notes the system type, the fault or the job, the address, who needs to be present (owner, tenant, agent or building manager) and any building access rules. Same-day visits are arranged where possible.

Inspection and Written Quote

A technician inspects the site and the existing system or the planned unit positions, then gives a written quote listing equipment, labour, extras and old unit removal. For repairs, the diagnosis comes first and any part is quoted before it is ordered. Work starts once the quote is accepted.

Installation or Repair, Testing and Handover

Each trade works under the licence it needs: ARC for refrigerant, a BPC-registered gasfitter for gas and a licensed electrician for wiring. The system is then tested, the controls are explained, and paperwork such as a Certificate of Electrical Safety or a gas compliance certificate is handed over where the job requires one.

FREQUENTLY ASKED QUESTIONS

Commercial Air Conditioning In

Everything you need to know about our Commercial Air Conditioning In

How much does commercial air conditioning cost in Richmond?

Melbourne cost guides put a commercial split at around $2,600 to $7,800 supplied and installed, a ceiling cassette at $4,200 to $9,900, and a small office system under about 200 m² at $7,800 to $15,600, with $11,450 typical (whatsthedamage, November 2026). Small ducted or packaged systems run $12,500 to $31,200 a job, and VRF is priced at $3,600 to $7,800 per indoor unit. Access, crane hire, after-hours work and building approval can add to these, and no published figure exists for them. Peak Air Conditioning Richmond gives a written, itemised quote after a site survey.

How does commercial air conditioning work?

In general terms it works like a home system, moving heat between indoor units and outdoor plant, but Mitsubishi Electric says commercial air conditioners cater to larger spaces, come in a wider range of larger capacities and have more sophisticated monitoring and control. Larger sites often use VRF or VRV, where one outdoor condensing unit runs many indoor units, or a self-contained packaged unit on the roof that feeds ducts. Smaller shops and offices can run on commercial splits, cassettes or under-ceiling units.

Is a ceiling cassette or a ducted system better for an office?

It depends on the ceiling and the layout. Mitsubishi Electric says ceiling cassettes suit open-plan offices that need four-way airflow and mount flush within a suspended ceiling, while its ducted units give concealed climate control across multiple zones with zone controllers. A cassette needs a suspended ceiling with room above it, and a ducted system needs space for the unit and its ducts. No maker gives a rule of thumb, so the choice is made at the site survey.

How often should commercial air conditioning be serviced?

Whatsthedamage, a Melbourne cost guide, gives quarterly to six-monthly visits depending on duty, plus a full system review once a year, and labels this as recommended practice rather than a regulation. The ARC and AIRAH refrigerant handling code says the system manual must set a leak-related maintenance schedule, and it gives a fallback leak inspection frequency based on refrigerant charge. The manufacturer's manual for the system comes first.

Can commercial air conditioning be installed outside trading hours?

Work can be arranged by agreement within the 6am to 10pm booking hours, seven days, so a survey or an install can be timed around trading. The line is not staffed between 10pm and 6am. Whatsthedamage lists work outside business hours as a cost driver, and repair guides put after-hours attendance at a premium, so any out-of-hours timing is priced on the quote.

Does a shop need building management approval for air conditioning?

Often it does, where the shop sits in a building with an owners corporation or a building manager. Whatsthedamage names building management approval as part of commercial access. Where the owners corporation has no rule of its own, Consumer Affairs Victoria's model rules require written approval before altering common property or changing a lot's external appearance, and say approval cannot be unreasonably withheld. The quote should state whether the tenant or the installer arranges that sign-off.

Request A Free Commercial Air Conditioning Quote

GET A FREE QUOTE