An air conditioning service Richmond homes can rely on is a set of checks, not a quick filter rinse. This page explains what a full service covers on split, multi-head, cassette and ducted systems: the filters and indoor coil, the condensate drain, the outdoor unit, refrigerant pressures and the controls. It sets out what Melbourne cost guides put servicing at, how often installers and cost guides suggest booking, and which months are easiest to get a technician. Richmond's homes run from single-fronted Victorian terraces to high-rise flats, so reaching the outdoor unit or the ducted plant is covered too. Peak Air Conditioning Richmond services air conditioners from 6am to 10pm, seven days, and leaves a written record of what was checked. Call 0468 046 042 to book a service.
GET A FREE QUOTE
Peak Air Conditioning Richmond installs, repairs, services and cleans heating and cooling systems across Richmond and 12 nearby suburbs. Two things set out what a buyer gets before any work is booked: a written quote that itemises the job, and one phone line that covers all 12 services from 6am to 10pm. Each trade's work is done under the licence it requires: an ARC refrigerant handling licence for refrigerant work, a licensed gasfitter registered with the Building and Plumbing Commission for gas work, and a licensed electrician, who issues a Certificate of Electrical Safety, for wiring.
Peak Air Conditioning Richmond
Air conditioning service in Richmond covers several kinds of system, and the type decides how long the visit runs and how each part is reached. The Quote Yard's Victorian servicing guide says system type and the number of indoor units shape the job more than the brand does, so the count of indoor units is the first question at booking. Ducted systems have their own section further down this page.
A wall-mounted split is one indoor head joined by refrigerant pipes to one outdoor unit. The Quote Yard counts what that means for a service: one set of filters, two coils and one drain, with a competent service taking around an hour. QuickAir, a Melbourne installer, gives the same hour for one unit and says the visit runs longer when the outdoor unit is hard to reach.
In Richmond that caveat carries weight. The ABS 2021 Census counted 53.0% of the suburb's occupied dwellings as flats or apartments, and The Quote Yard notes that apartment outdoor units may sit on common property, on a balcony or in a service cupboard, where the owners corporation may need notice before work starts. On a terrace, the outdoor unit is often in a narrow side path, which QuickAir names as one of the access problems that add labour time. Saying where the outdoor unit sits when booking lets the visit be planned around it.
A multi-head system runs two or more indoor units from one outdoor unit. Mitsubishi Electric describes multi-head splits as connecting several indoor units to a single outdoor unit, with a larger outdoor unit able to take more heads. The Quote Yard notes that multi-head installations are common through Melbourne's inner suburbs, where outdoor space is limited.
For a service, that layout multiplies the work rather than the complexity. The Quote Yard says each head has its own filters, coil and condensate drain and needs individual attention, which is why the price scales with the number of heads. It also warns that a single neglected head drags on the performance of the whole system, because every head relies on the same outdoor unit. So each indoor head is cleaned and checked in turn, and the shared outdoor unit is serviced once at the end. When comparing quotes, the guide suggests asking whether the price covers every indoor unit or only a nominated number of them.
Not every unit hangs high on a wall. Mitsubishi Electric's light commercial range includes ceiling cassettes that mount flush within a suspended ceiling, with four-way or one-way airflow, and the brand describes its bulkhead ducted units as the slim option for homes where ceiling space is limited. Floor consoles sit low on a wall where an upper position will not work.
Mitsubishi Electric's own filter cleaning guide draws the line for owners: it says some air conditioners, such as ducted, cassette bulkhead systems and outdoor units, may require professional cleaning methods. A cassette or bulkhead is generally opened from below or through an access panel rather than by lifting a front cover, so ceiling height and the way the unit opens set the time on site. The checks are the same as for a wall split: filters, coil, drain, outdoor unit, refrigerant pressures and controls. The model and the room each unit sits in are worth giving when booking, so the right ladder and access are brought.


Peak Air Conditioning Richmond
QuickAir lists what a full service covers: an indoor coil clean, a drain flush, an outdoor unit clean, operating checks and a refrigerant assessment. The Quote Yard adds electrical testing and performance measurement, and says a technician who touches only the filters has covered perhaps a fifth of the system. The five steps below follow those two Melbourne sources, with manufacturer manuals named where they give the detail.
The filters come out first. The Quote Yard says they are removed, washed or replaced, and the housing they sit in is cleaned out, which restores airflow. Filter types differ: washable mesh filters on most domestic splits, disposable pleated filters on some systems, and a large return air filter on ducted installations. Washing a filter that is meant to be replaced ruins it, so the type is confirmed before any filter goes under the tap.
The indoor coil is then cleaned in place on the wall. QuickAir's checklist explains why it is a separate item: dirt on the evaporator coil and fins sits well beyond anything a filter wash reaches. Between services, Mitsubishi Electric advises owners to clean filters every two weeks during peak seasons for regular home use, and says once a month may be enough for light seasonal use. A routine service clean is not a strip-down. A chemical wash of the coil and fan is a separate job, covered on the aircon cleaning page.
An air conditioner draws moisture out of the air as it cools, and that water collects in a tray under the indoor coil before running out through the drain line. The Quote Yard calls drainage checks the step that prevents the most common water damage in the trade. Its guide says the drain pan and line block with biological growth and dust over time, and the water then backs up and overflows into the ceiling or down the wall.
The same guide describes clearing and treating the drain as a five-minute job during a service, against a ceiling repair if it is skipped. QuickAir's checklist makes the same link, naming build-up in the condensate drain as the cause of water leaking from an indoor unit. As general practice, the tray is looked at for sludge and standing water, and the line is flushed until it runs freely to its outlet. Mitsubishi Heavy Industries gives owners a simple check between visits: water running from the drain pipe next to the outdoor unit while the system runs shows the drain is working.
The outdoor unit gives off heat in cooling mode, so its coil needs air moving freely across it. The Quote Yard says a dirty coil forces the system to run longer and draw more power for the same result, and that outdoor units in Melbourne collect a surprising amount through spring pollen and summer dust. QuickAir adds that leaves, dust and plant growth block airflow at the condenser, so the coil is cleaned and the base cleared.
The fan is checked next. The Quote Yard's repair guide lists debris, hail and blades cracking with age as causes of imbalance and noise, and failed anti-vibration mounts or a loose panel as reasons a unit turns noisy. Clearance comes last. Mitsubishi Electric's MSZ-AP installation manual draws minimum gaps around its outdoor unit from 100 mm on its tightest sides to 350 mm on its widest, with open space above, while The Quote Yard treats half a metre of clear space as a reasonable minimum. Garden growth, stacked items, fence panels built too close and covers left on all cut that space, and are noted where found.
A service reads the refrigerant side without topping it up. QuickAir says a service includes checking refrigerant levels and pressures, and that adding or replacing refrigerant is separate work. The Quote Yard describes the measurement: operating pressures and temperature differentials are checked against what the system should be producing. Gauges connect at the outdoor unit's service port, and the Australian Refrigeration Council's code of practice asks for access valve caps to be refitted afterwards, since valves are among the common leakage points it lists.
The Quote Yard also warns owners about the opposite habit. It calls routine regassing a warning sign rather than normal maintenance, because a sealed system does not use refrigerant up, so a low reading means a leak. Its guide lists the signs owners notice, such as weaker output, longer run times, ice on the indoor coil or copper lines and higher bills, and says none of them proves a low charge on its own, since a blocked filter causes several of the same symptoms. A low reading goes on the service record and is passed to aircon regas and leak repair, where the leak is found before any gas goes in.
The last step shows the system working as a whole. QuickAir's checklist includes a thermostat and controller test, which it says separates a maintenance issue from a control fault, plus a check of the electrical components and the compressor's amp draw. The Quote Yard lists the same close-out: connections inspected and tightened, current draw measured, and the controls and thermostat verified against what the system should deliver.
As general practice, each mode the unit offers, such as cooling, heating, dry and fan, is run in turn, every fan speed is selected from the remote or wall controller, and the louvres are moved through their range. A control fault shows up then rather than on the first hot day. The Quote Yard adds two points owners often miss. An inverter runs quietly for long periods rather than starting and stopping, which is the system working correctly, while constant short cycling is the pattern worth reporting. And switching off at the remote is not isolating the unit, because the circuit stays live, so the isolator is confirmed reachable too.
Peak Air Conditioning Richmond
A licensed air conditioning service rests on three things a household can check: who may legally open the unit, what is written down afterwards, and how a fault is handled. Peak Air Conditioning Richmond takes service bookings from 6am to 10pm, seven days. The Quote Yard suggests asking to see a service checklist before booking, because it is the only way to compare two quotes that both use the word service.
RAC stands for refrigeration and air conditioning, and the Australian Refrigeration Council administers the national licence for working on it. The council's licensing page says any person who handles refrigerant or works on RAC equipment must hold a refrigerant handling licence. It defines handling to include manufacturing, installing, commissioning, servicing or maintaining RAC equipment, whether or not refrigerant is present.
That last clause is the one that reaches a routine service. Washing a coil, flushing a drain or reading a circuit board inside a split is licensed work even though the refrigerant circuit stays closed, and connecting gauges to read pressures involves the refrigerant directly. QuickAir's Melbourne guide suggests checking a technician's licence details against the council's public licence register before anyone opens the system. Electrical work is a separate trade. The Quote Yard notes that refrigerant handling and electrical work are distinct qualifications, and that isolator replacement, dedicated circuits, switchboard capacity and wiring alterations belong to a licensed electrician. Each part of a service is done under the licence that part requires.
The Quote Yard puts it plainly: what a service record should contain is more than a receipt for payment. Its guide lists the date, the work performed, the measurements taken, parts replaced, faults identified and the technician's licence details, and says an invoice reading only 'service' with a dollar figure proves very little about what was done.
For an air conditioner, a useful record names the condition of the filters and indoor coil, whether the drain ran clear, the state of the outdoor coil, fan and clearance, the refrigerant pressures read, the result of the operating checks, any fault found, and when the next service falls due. The record then does two jobs. The next technician has readings to compare against, and The Quote Yard notes that a service history helps when weighing repair against replacement, or when selling a home. In a suburb where the ABS 2021 Census counted 54.7% of homes as rented, the record also gives an owner and a property manager the same written account of a unit neither of them watched being serviced.
A service is preventive maintenance, and The Quote Yard says parts and fault correction are quoted separately rather than folded into the service price. That matters because a service is often where a worn part first shows up: a swelling capacitor, a pitted contactor, an oily flare joint or a drain that will not clear. When one is found, it goes on the service record with what was seen and what fixing it involves.
The repair is then quoted in writing, and no repair starts until the owner, or the managing agent of a rented home, has approved that quote. QuickAir warns about the opposite pattern, where a maintenance-only booking starts charging for diagnosis from the moment a cause has to be found, which is how a cheap service turns into a larger invoice. Keeping the two steps apart means the service price stays the service price. Repair prices, the repair-or-replace question and the rules for urgent repairs in rented homes are covered on the air conditioning repair page.


Peak Air Conditioning Richmond
The air conditioning service cost figures below come from independent Melbourne and Victorian cost guides and installer benchmarks, each re-read on 19 November 2026. They are indicative market ranges, not Peak Air Conditioning Richmond's price list. The Quote Yard says scope sets the price more than the system does, so the figure that counts is a written price for the units actually in the home.
For a single wall split, the Melbourne sources land close together. QuickAir puts a standard service on one split with no faults found at $120 to $220, and a basic filter clean and check at $80 to $130. The Quote Yard's Melbourne table gives $140 to $230 for a full service on a single split, inside its Victorian range of $120 to $250. Climate Control Solutions, a Melbourne installer, lists $150 to $250 for a split with no faults.
As a cross-check, whatsthedamage.com.au's Melbourne table, updated November 2026, puts an air conditioning service or clean at $105 to $335 per unit, with $210 typical. The spread is mostly scope. The cheapest row is a filter visit, and The Quote Yard says a heavily discounted advertised service is generally a filter clean and a visual check that leaves the coils, drainage and electrical checks untouched. Both guides also say time adds cost: QuickAir names a hard-to-reach outdoor unit and a system not cleaned in years, and The Quote Yard says the first service after a long gap is nearly always the most expensive one.
Multi-head prices rise with the number of heads. QuickAir puts a multi-unit visit covering two to three heads at $280 to $480. The Quote Yard's Victorian table gives $180 to $400 for a multi-head system and notes the price grows per head added. Climate Control Solutions prices the increment directly, adding $80 to $120 for each extra head on top of its split service.
The extra charge reflects real work, not a booking fee. Each head has its own filters, coil and drain to clean, so a three-head system involves three of each, while the shared outdoor unit is serviced once. QuickAir says a visit takes longer when several indoor heads are being serviced, which is why its multi-unit row sits well above its single split row. Two quotes for the same home are only comparable when both state how many heads they include, which is the question The Quote Yard suggests asking before booking. QuickAir also says difficult access adds labour time, which applies to a hard-to-reach indoor head as much as to the outdoor unit.
Ducted servicing is priced per system rather than per outlet. The whatsthedamage.com.au Melbourne table lists a ducted system service at $210 to $580 per system, with $345 typical. The Quote Yard's Victorian range is $250 to $500, and its Melbourne table gives $280 to $500 for a ducted system with multiple zones. Climate Control Solutions puts a reverse cycle ducted service at $250 to $450.
The Quote Yard explains why ducted sits above a split: the plant is usually in a roof space or under the floor, access takes time, and there are zone dampers and controls to check. The number of zones and how easily the fan coil can be reached are what move a ducted price within those ranges. Duct repairs and duct cleaning are not included, since the same guide treats them as separate jobs from a system service. Gas ducted heaters are a different appliance again, with gasfitting checks and prices of their own that these reverse cycle figures do not cover.
Two extras can sit around the service price. The first is a callout fee. QuickAir says some Melbourne operators add $60 to $100 on top for customers who are not already on their books, so a service quote is only comparable once it states whether the callout is included. QuickAir also puts Melbourne service vans at about $90 to $140 an hour plus parts, which is what sits behind most hourly quotes. For a fault visit rather than a service, The Quote Yard's repair guide places Richmond in its Inner Melbourne and CBD band, with callouts at around $160 to $280.
The second is an annual maintenance plan. The Quote Yard's Victorian table lists plans at $200 to $450 a year, with two visits as typical. That is an aggregator's range describing plans sold across the trade, not a plan offered on this page. It gives a useful yardstick all the same: a plan's yearly price can be set against the cost of the same number of separate service bookings, using the per-unit figures above.
Peak Air Conditioning Richmond
No single service interval applies to every air conditioner, and none of the intervals below is a regulation or a manufacturer requirement. They come from QuickAir, a Melbourne installer, and The Quote Yard, a Victorian cost guide. QuickAir itself says some manufacturers recommend annual professional servicing while others say every one to two years depending on use, so the model's own manual is the first thing to check.
QuickAir recommends a service once a year for most Melbourne homes, because a reverse cycle system here carries the house through winter as well as summer. The Quote Yard makes the same case in terms of wear. It calls annual servicing the sensible default for a domestic system in Victoria, since a Melbourne reverse cycle unit carries the summer cooling and much of the winter heating, and running hours rather than calendar years are what wear a system.
The guide also explains what a yearly visit protects. It says the compressor is the costly component, and that it fails early when it is made to work against fouled coils, restricted airflow and a low charge, which are the three things a service checks. QuickAir adds that most Melbourne homes run heating harder than cooling, so a system used as the main heater earns the yearly visit on winter hours alone. Daikin, for its own split systems, links its 10 to 15 year lifespan figure to regular maintenance and servicing, which is a brand claim rather than an industry standard. The Quote Yard notes that a system serviced every year is quick to work through.
The Quote Yard says some situations justify twice-yearly attention, and two of its examples fit inner-city homes closely: homes with pets shedding into the return air, and systems running long hours in home offices. Both load filters and coils faster than average. Pet hair is drawn into the indoor unit with the room air and mats across the filter, while a split that heats or cools a study through a full working day gathers running hours far faster than one used only in the evening.
The guide's other twice-yearly cases include properties near main roads or construction, which is worth weighing for a flat above a shopping strip such as Swan Street or Bridge Road, both listed by Wikipedia among Richmond's major activity centres. The Quote Yard's practical test is simple: judge the interval on how the filters look after six months. A filter matted grey at the half-year point suggests a second visit is worth booking, while one that is barely dusty suggests once a year is enough. Owners can make that check themselves when they clean the filters between services.
At the other end of the range, QuickAir says a cooling-only unit that runs a few weeks a year can stretch to every two years. True cooling-only splits are uncommon in Melbourne: Mitsubishi Electric says most split systems heat as well as cool, and it limits its own cooling-only wall split range to Northern Australia. In practice the two-year interval suits any unit used lightly for cooling alone, for example a bedroom split in a home heated another way.
The longer gap only holds if the owner keeps up the filter cleaning, since QuickAir notes that filters need attention far more often than any service interval. A unit left for two years also tends to collect the drain and coil build-up described in the checklist above, and The Quote Yard says the first service after a long gap is nearly always the most expensive one. QuickAir lists the signs that should bring a service forward whatever the interval: weak airflow, unusual noise, water leaking from the indoor unit, or a musty smell. Any of those on a lightly used unit is a reason to book early rather than wait out the second year.


Peak Air Conditioning Richmond
A ducted reverse cycle system adds a hidden fan coil, a duct network and a zone controller to the standard service. The Quote Yard says ducted systems bring the ductwork itself into the picture, with zone dampers, motors and controls to verify alongside the refrigeration side. The filter, drain and refrigerant checks follow the service checklist above, so the three headings below cover only the parts a ducted system has.
The fan coil is the indoor half of a ducted system, and reaching it is often the slowest part of the visit. The Quote Yard says the plant usually sits in a roof space or under the floor, and that access takes time and can mean working in an awkward position. Both positions exist on the market: Daikin's ducted range includes underfloor inverter models. Mitsubishi Electric's PEA-M ducted installation manual asks installers to leave enough room to maintain, inspect and replace the motor, fan, drain pump, heat exchanger and electrical box, so a well-installed unit has that space built in.
Whether a given home has easy access varies. Wikipedia describes most Richmond houses as single-fronted Victorian homes on long, thin blocks, and The Quote Yard notes that older inner-suburb housing was never designed around ducted systems. Where the hatch is and how the plant is reached are worth describing when booking. The return air filter is serviced on the same visit: Mitsubishi Electric's manual places it in the inlet grille and lets the installer set a filter reminder at 100 or 2,500 hours, and The Quote Yard says return air filters get neglected precisely because they sit out of sight.
Zoning is where a ducted service differs most from a split. A motorised damper in each zone's duct opens or closes it on command from a zone controller. Mitsubishi Electric's ducted page says its Zone Controller can create up to 4 or 8 separate zones, and its May 2026 brochure lists 4 and 10-zone models with on/off or linear damper motors. The brochure also says its controllers can send notifications when filter cleaning and a service are due.
As general practice, each zone is opened and closed from the controller in turn, and air is confirmed arriving, or stopping, at that zone's outlets. A damper that sticks part-way usually shows up as one room that never quite heats or cools. The same brochure describes an air balance setting that caps each damper's maximum opening, so uneven airflow can come from the settings rather than a failed part, and it allows 24 VAC drive-open, drive-closed damper motors from different makers on one system, so a mixed set is not a fault in itself. The Quote Yard warns that zone motors, controllers and dampers each add a potential failure point, which is why they are worth checking at a service rather than when one fails.
The last ducted check is the air path itself. The Quote Yard says ductwork condition is a genuine issue in older Victorian installations: flexible ducting degrades over decades, insulation deteriorates, joints separate and rodents occasionally damage runs in roof spaces, and any of those wastes conditioned air into space nobody uses. Its advice is that a service should take in a look at whatever ductwork can be reached. YourHome, the Australian Government's housing guide, names the cost of a poor duct: condensation, air leakage and lost heating or cooling energy where ducts are not adequately insulated and sealed.
At the outlets, airflow from each supply vent is compared as general practice, and blocked return paths are noted. The Quote Yard says furniture pushed against a return grille, or a door kept shut on a zoned room, cuts the air the system can move in a way that looks like a refrigeration fault. A torn or flattened run seen during the check goes on the service record. The repair of that run, and duct cleaning, are separate jobs from a service, and both are covered for ducted heating on the ducted heating service and repairs page, along with the service of gas ducted heaters.
Peak Air Conditioning Richmond
Timing changes how easy a service is to book. QuickAir says March, April, September and October are the easy months to book in Melbourne, and The Quote Yard describes November through February as peak season across Victoria, with price and availability both reflecting it. The two shoulder windows below line up with the seasons a system is about to face.
QuickAir's advice for a system relied on for cooling is to book in September or October. The Quote Yard explains the logic: servicing in early spring readies the system before summer and catches problems while technicians still have availability. Its guide puts the case in one line, saying a fault found in September is an inconvenience.
A spring service also deals with what winter left behind. The outdoor unit has sat through the cooler months, and The Quote Yard says outdoor units in Melbourne collect a surprising amount through spring pollen and summer dust, so a coil cleaned in spring starts summer clear. Any fault found in September leaves time for a quote, an approval and, where a part has to be ordered, a second visit before the first hot spell. Because The Quote Yard counts November among the busiest months for every technician in the state, a booking made by late October stays ahead of the rush. A household that relies on cooling for a home office through summer gains the most from that margin.
For a system relied on for heating, QuickAir points to March and April, and The Quote Yard says autumn suits properties relying on the system for winter heating. In Melbourne that window matters more than it would in a warmer city. QuickAir notes that most homes here run heating harder than cooling, so the autumn service is the one that prepares a reverse cycle system for its longest stretch of work.
Heating mode asks things of the outdoor unit that summer does not. Mitsubishi Electric's split manual says the outdoor unit produces condensate during heating, and that wind on the unit lengthens defrosting, so autumn is the time to see that the outdoor drain path is clear and the unit is not boxed in. Clean filters matter going into winter as well. QuickAir says clean filters help running costs in both directions, and gives that as the practical argument for servicing before winter rather than after it. Homes that also run a gas heater have a separate gasfitter service to plan, which suits the same autumn window.
QuickAir describes Melbourne as having two demand peaks rather than one: the first genuine cold snap in May and the first serious heatwave in December both fill the diary. Those are the days a system that has sat idle for months is switched on in earnest, and any fault that built up while it rested appears at once, in many homes on the same day.
The Quote Yard calls December the worst month to discover a fault, because it is precisely when everyone else is discovering theirs. The risk is not the service itself but what it might find. A fault found in a shoulder month can be quoted, approved and fixed with time to spare, including any part that has to be ordered in. The same fault found on the first very hot day joins every other urgent call across the city, and the household waits its turn with a unit that does not work. A service booked a few weeks ahead of each peak is the simple way to avoid that queue.


Call the one number any day between 6am and 10pm. The booking notes the system type, the fault or the job, the address, who needs to be present (owner, tenant, agent or building manager) and any building access rules. Same-day visits are arranged where possible.

A technician inspects the site and the existing system or the planned unit positions, then gives a written quote listing equipment, labour, extras and old unit removal. For repairs, the diagnosis comes first and any part is quoted before it is ordered. Work starts once the quote is accepted.

Each trade works under the licence it needs: ARC for refrigerant, a BPC-registered gasfitter for gas and a licensed electrician for wiring. The system is then tested, the controls are explained, and paperwork such as a Certificate of Electrical Safety or a gas compliance certificate is handed over where the job requires one.
Melbourne cost guides put the air conditioning service cost for a single split with no faults at around $120 to $220 on QuickAir's figures, or $140 to $230 on The Quote Yard's Melbourne table. A multi-unit visit covering two to three heads runs at $280 to $480 on QuickAir's figures, and a ducted system at $210 to $580 per system on whatsthedamage.com.au's Melbourne table. Some operators add a callout fee of $60 to $100 on top. These are indicative market ranges rather than a set price, and a written price is given for the units in the home.
QuickAir, a Melbourne installer, recommends once a year for most Melbourne homes, because a reverse cycle system works through winter as well as summer, and The Quote Yard calls annual servicing the sensible default in Victoria. The Quote Yard suggests twice a year for homes with pets shedding into the return air or systems running long hours in home offices. QuickAir says a cooling-only unit used a few weeks a year can stretch to every two years. None of these is a regulation, so the unit's own manual is worth checking first.
QuickAir lists an indoor coil clean, a drain flush, an outdoor unit clean, operating checks and a refrigerant assessment, on top of washing the filters. The Quote Yard adds electrical testing, with connections tightened and current draw measured, and a check of the controls and thermostat. On a ducted system the zones, dampers, outlets and reachable ductwork are checked as well. A service reads refrigerant pressures but adds no refrigerant, and any fault found is written up and quoted separately.
QuickAir and The Quote Yard both put a service on one split system at around an hour. QuickAir says it runs longer when the outdoor unit is hard to reach, when several indoor heads are being serviced, when the system has not been cleaned in years, or when a fault needs closer attention. A ducted system takes longer again, since The Quote Yard notes that reaching plant in a roof space or under the floor takes time. The Quote Yard describes a fifteen-minute visit as a filter clean and a visual check, not a full service.
Yes. The Australian Refrigeration Council says any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence. It defines handling to include servicing and maintaining that equipment whether or not refrigerant is present, so a routine service on a split system is licensed work. Electrical work on isolators, circuits and wiring is a separate trade for a licensed electrician, as The Quote Yard points out. QuickAir suggests checking a licence against the council's public licence register before work starts.
Mitsubishi Electric's filter guide says that for regular home use the filters should be cleaned every two weeks during peak seasons, and that once a month may be sufficient for light seasonal use. Owners can do this themselves by removing and rinsing washable filters, though Mitsubishi Electric says water should never be applied to the inner workings of the unit. The Quote Yard notes that some systems take disposable pleated filters that are replaced rather than washed, so the filter type is worth checking first. The coil, drain, outdoor unit and refrigerant checks still need a technician.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm